KI Tattoo Chest Assembly Instructions
Text of KI Tattoo Chest Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Required Tools
•
12 mm Hex Wrench
•
Power Drill Driver
•
#3 Phillips Tip
•
8” Drill Extension
Note: Leg posts are designed to
receive either casters or glides,
ba
Assemble units as described herein only. To do otherwise may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Chest, Tower & Vanity
Assembly Instructions
Figure 2
storage unit
(vanity shown)
leg post
(glide)
stem-mount
glide
stem-mount
glide
Glide Installation
1. Thread
Assemble units as described herein only. To do otherwise may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Tattoo™ Chest, Tower & Vanity - Door Hinge Adjustment
Assembly Instructions
Door Hinge Adjustment
Note: If doors on the storage unit
are not aligned, follow instruction
Tattoo™ Chest, Tower & Vanity
Assembly Instructions
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2019 Krueger International, Inc. All Rights Reserved • Code KI-AI-000035R1/KI/PDF/0819
Part # 2.57090