Axonics SNM System 2501 Manual 

Clinician Programmer Manual Model 2501 Clinician Programmer !USA Rx ONLY ...

Axonics, Inc., registered or pending registration in the U.S. and other countries. Refer to the appropriate clinician manuals for additional information on the Axonics SNM System, including contraindications, warnings, precautions, adverse events, individualization of treatment, ...

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Indications, Warnings, and Precautions Purpose of the trial system Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Device Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating Characteristics Storage ...

Programmer (CP). The CP can be used during implantation and programming of the following Axonics SNM System components: • Axonics Model 1601 Trial Stimulator • Axonics Model 1901 PNE Lead • Axonics Model 1201, 2201 Tined Lead • A ...

• Refer to Indications for Use insert for indications and contraindications • Refer to Information for Prescribers booklet for warnings, precautions, adverse events, patient selection and clinical summary. • Refer to MRI Physician Guidelines for MRI specific conditions and contraindications. Purpose ...

should only be used with manufacturer provided accessories. Do not use the CP for stimulation or other purposes not described in this manual. Unintended use can result in user or patient injury. Accidental Electrode Contact – Avoid ...

External power source: Powerbox EMX30 Input Power: 100 – 240 VAC, 47 – 63 Hz, 0.3 - 0.6 A Output Power: 15 V, 2 A Battery life*: 3 hours per charge; 5-years expected lifetime Dimensions: 257 mm (w) x 246 mm (h) x 22 mm (d) Weight: 1125 g Material: • Housi ...

the Log-In screen is still accessible. Significant physical damage or an inability to power on the device should be reported to the manufacturer and the device should not be used. Handling and Disposal • Cl ...

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter is authorized by rule under ...