Axis Q1942-E Operation & User’s Manual

This manual is intended for administrators and users of AXIS Q1942-E PT Mount Thermal Network Camera, and is applicable to firmware 6.40 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based sys ...

twisted pair) 케이블을사용하여제품을연결하십시오. Safety This product complies with IEC/EN/UL 60950-1 and IEC/EN/UL 60950-22, Safety of Information Technology Equipment. The product shall be grounded either through a shielded network cable (STP) or other appropriate method. T ...

Table of Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Other message levels . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Table of Contents Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 How to check the current firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 How to upgrade the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Safety information Safety information Hazard levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a hazardous situation which, if not avo ...

Hardware overview Hardware overview For specifications of the hardware components, see Technical specifications on page 55. NO NO NOTICE TICE TICE Never remove both the sunshield and the PT Mount bracket. One of them must remain to keep the camera assembly intact. 1 Sunshield 2 RS485/RS422 connector 3 Power connec ...

How to access the product How to access the product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. We recommend the following browsers: • Internet Explorer® with Windows® • Safari® with OS X® • ChromeTM ...

How to access the product How to set the root password To access the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which opens when the product is accessed for the first time. To prevent network eavesdropping, the root password ...

How to access the product About the manual trigger The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration. To configure the manual trigger: 1. Go to Setup > Events. 2. Click Add to ad ...