Axis NPS 650 Quick Installation Manual

Text of the manual

Axis NPS 650

Quick Installation Guide Token Ring Print Server for • NetWare • Windows • OS/2 • Unix

Quick Installation Guide

This guide covers the installation and basic configuration procedures for the NetWare, Windows, OS/2, and Unix environments. For advanced configuration and further customizing, please consult the NPS 650 User’s Manual. What is on the disk? The disk contains installation, configuration and print utilitites for the different printing

The procedure below applies to the NPS 650 Print Server Mode only

and is recommended only if you have a small network with just a few file servers. If you prefer to use the Remote Printer Mode or if you have a larger network, see the NPS 650 User’s Manual. Setup and printing is done using the Novell PCONSOLE and CAPTURE applications respectively. I

This section describes how to set up your NPS 650 for the Microsoft

Windows printing environment. The NPS 650 setup for Windows comprises installing the NPS 650 printer ports as Windows printer ports, and connecting the ports to a Windows printer driver. Setup and printing is done using Axis Print Utility for Windows. To install: Insert the disk inc

Accept or change the suggested Windows port name, and type any

comments in the Description field. Make a note of the Windows port name (you will need it later), then click OK to install the Windows port. 5. In the Port menu, click Connect to bring up the Windows Printers dialog. 6. Select a printer driver from the list of Installed Printers (or click Add>

Follow these steps to install an NPS 650 printer port as a Windows

port, and to connect a printer driver: 1. Double-click the Axis Print Utility. 2. In the Port menu, click Add. 3. In the NPS Port list, select the NPS 650 port you want to install. The ports appear as .LP1, .LP2 and .CM1, where is the NPS 650 print server n

The NetBEUI protocol must be active. If not, use MPTN/LAPS

(LAN Server) or SETUP (LAN Manager) to activate it. Install the Axis Print Utility and your NPS 650: 1. Install the Axis Print Utility for OS/2: Insert the disk included with your delivery, and execute a:\axpu\install.exe. 2. When Axis Print Utility is running, click Install to install your NPS

Print queue sharing:

A print queue must be made a shared resource before it can be accessed from other computers (clients or other servers). Open an OS/2 window and issue the following command: Queue_name is the queue created above. NET SHARE queue_name /PRINT

Other Print Server Manuals