Axis NPS 530 Quick Installation Manual
Text of the manual
Axis NPS 530/532
Quick Installation Guide
Ethernet Print Server for
•
NetWare
•
Windows
•
OS/2
•
Unix
•
Macintosh
Quick Installation Guide
This guide covers the installation and basic configuration procedures
for the NetWare, Windows, OS/2, Unix, and Macintosh
environments. For advanced configuration and further customizing,
please consult the NPS 530/532 User’s Manual.
What is on the disk?
The disk contains installation, configuration and print utilitites for
the dif
The procedure below applies to the NPS 530/532 Print Server Mode
only and is recommended only if you have a small network with just a
few file servers. If you prefer to use the Remote Printer Mode or if
you have a larger network, see the NPS 530/532 User’s Manual.
Setup and printing is done using the Novell PCONSOLE and
CAPTURE applications respect
This section describes how to set up your NPS 530/532 for the
Microsoft Windows printing environment.
The NPS 530/532 setup for Windows comprises installing the NPS
530/532 printer ports as Windows printer ports, and connecting the
ports to a Windows printer driver.
Setup and printing is done using Axis Print Utility for Windows. To
install: Insert
Accept or change the suggested Windows port name, and type any
comments in the Description field. Make a note of the Windows
port name (you will need it later), then click OK to install the
Windows port.
5.
In the Port menu, click Connect to bring up the Windows
Printers dialog.
6.
Select a printer driver from the list of Installed Printers (or click
Add>
Follow these steps to install an NPS 530/532 printer port as a
Windows port, and to connect a printer driver:
1.
Double-click the Axis Print Utility.
2.
In the Port menu, click Add.
3.
In the NPS Port list, select the NPS 530/532 port you want to
install.
The port appears as .LP1, where is the NPS
530/532 print server name (AXIS... is
The NetBEUI protocol must be active. If not, use MPTN/LAPS
(LAN Server) or SETUP (LAN Manager) to activate it.
Install the Axis Print Utility and your NPS 530/532:
1.
Install the Axis Print Utility for OS/2: Insert the disk included
with your delivery, and execute a:\axpu\install.exe.
2.
When Axis Print Utility is running, click Install to install your
Print queue sharing:
A print queue must be made a shared resource before it can be
accessed from other computers (clients or other servers). Open an
OS/2 window and issue the following command:
Queue_name is the queue created above.
Protocol Upgrades
Unix & Macintosh
Software keys for upgrading to Unix and Macintosh are available
separately from your dealer.
You will need root privileges for the configuration.
1.
Find an unused Internet address (IP address) and choose a unique
host name for your NPS 530/532.
2.
Add the NPS 530/532 IP address and host name to your system
host table by appending the following line to the /etc/hosts file:
Example: (Use the IP address and host name from step 1.)
192.36.253.96
s