Axis Q8632-E Operation & User’s Manual

This manual is intended for administrators and users of AXIS Q8632-E PT Mount Network Camera, and is applicable to firmware 6.50 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems may ...

shielded network cable (STP) or other appropriate method. The 24 V AC and 230 V AC variants of this product comply with IEC/EN 60950-1 and IEC/EN 60950-22, Safety of Information Technology Equipment. The product shall be grounded either through a shielded network cable (STP) or other approp ...

Table of Contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Other message levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Table of Contents Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 How to check the current firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 How to upgrade the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Safety information Safety information Hazard levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a hazardous situation which, if not avoided, ...

Hardware overview Hardware overview For specifications of the hardware components, see Technical specifications on page 58. • For an overview of the housing unit see page 8 • For an overview of the buttons and connectors on the camera, see page 8 1 Sunshield 2 PT Thermal Network Camera 3 Base Unit 7 ...

Hardware overview Housing Unit 1 Top cover 2 Protective window 3 Thermal network camera Camera Unit 1 RS485/RS422 connector 2 Power connector 3 Network connector 4 Status indicator LED 5 microSD memory card slot 6 Control button 8 ...

How to access the product How to access the product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. We recommend the following browsers: • Internet Explorer® with Windows® • Safari® with OS X® • ChromeTM or Fir ...

How to access the product How to set the root password To access the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which opens when the product is accessed for the first time. To prevent network eavesdropping, the root password can be ...