Avnet AVT9152 EVB Quick Start Manual

Document Author: Jennifer Sy Document Classification: Public Document Distribution: Public Version History Version Date Comment 1.0 04 Dec 2020 First Release ...

2 Kit content ............................................................................................................................................. 4 3 eUICC ..................................................................................................................................................... 4 4 AVT9152 EVB demo web portal ............................................................................................................ 5 4.1 Sign up for an account .. ...

2 Kit content An AVT9152 EVB kit includes: 1) AVT9152 evaluation board 2) External paddle LTE antenna 3) Active GPS/GALILEO ceramic patch antenna 4) Global eUICC plastic card 5) Wall mount universal AC-DC 5V power adaptor 6) 6-pin rainbow jumper cable 7) 10-pin header J-link ribbon cable 3 eUICC The eUICC provided comes with FREE subscription plan. This plan expires 3 months after first connection to the network or when 50MB of data quota is consumed whichever comes first. You will need to activate it through https://www.avnet.com/wps/portal/ ...

This section shows the user how to register to and access AVT9152 EVB unit from AVT9152 demo web portal. 4.1 Sign up for an account Proceed to add AVT9152 EVB to demo web portal if you already have an account with the demo web portal. 1) Open https://avtdemo.iotconnect.io/login. 2) Click SIGN UP. 3) Fill up the form and click SIGN UP to send the request. ...

for the temporary password. Check your Junk Email folder if you haven’t received it after a few minutes. 5) Use the temporary password provided to login for the first time then replace with own password for subsequent login. 4.2 Add AVT9152 EVB to demo web portal 1) Open https://avtdemo.iotconnect.io/login. 2) Fill in your account login details and click LOGIN. ...

4) Click ADD DEVICE. 5) Locate your AVT9152 EVB’s 15-digit IMEI number. ...

7) AVT9152 EVB successfully added. 8) Complete set up AVT9152 EVB to start collecting data. 4.3 Dashboard view Dashboard view presents the latest data from the selected unit as well as the daily average environmental data for the past 7 days. Name to identify the device. For example, avt9152- Your EVB’s IMEI ...

* A green circle on the right of the selected unit’s display name indicates the device is connected while a red circle indicates the device is not connected. ** Rotation speed is calculated from the biggest angular change on the z-axis triggered by rotating clockwise or counterclockwise the AVT9152 EVB in a face up position. Last reported location Last reported orientation Last reported rotation speed ** Temperature Humidity Pressure Light Motion (PIR) Selected unit Connection status* ...

4.4 Devices view Devices view shows the latest data from the selected device as well as a line chart of the last 20 (max) data points of the selected attribute received from the time this view is loaded. It allows the user to enable/disable the motion (PIR) detection and the GPS location tracking. Both functions are disabled by default from power up/reset. To switch to Devices view, 1) Click the Devices icon located on the left side of the page. 2) Click the Device Unique ID of the device of interest. Devices ...

4.4.2 Live data Select from this column Enable / Disable motion (PIR) detection Enable / Disable location tracking Connection status Selected attribute ...

This section provides a step-by-step guide on how to prepare AVT9152 EVB to start sending data to AVT9152 demo web portal for the out-of-box demo. 5.1 Make sure the following jumpers are in place AVT9152 EVB is shipped with jumpers on their default positions described in this section. User may go straight to connect the following pins with jumper wires if no jumper has been altered. Header : Pin Purpose J18 : 2-3 Set 5V DC Jack as the VDD_Supply source J20 : 2-3 Set 5V DC Jack as the VDD_5V_Arduino source J6 : 1-2 Enable AVT9152 module J16 : 1-2 Set to use SMA Antenna J2 : 1-2 Enable U2 LIS2DH12 J2 : 3-4 Enable U3 I3G4250D ...

Connects D1 to nRF9160 P0.16 J12 : 2-3 Connects D6 to nRF9160 P0.20 J13 : 2-3 Connects A2 to nRF9160 P0.13 J13 : 5-6 Connects A3 to nRF9160 P0.14 J15 : 3-4 Connects UART_TX to nRF9160 P0.25 for USB-to-UART on P1 J15 : 1-2 Connects UART_RX to nRF9160 P0.24 for USB-to-UART on P1 J21 : 1-2 Connects SIM_IO to SIM card connector J22 : 1-2 Enable power to RF Switch J23 : 1-2 Enable D13 (will turn on when VDD_Supply is available) 5.2 Connect the following pins with jumper wires Arduino IO J1 Sensor Header Function D0 PIN 1 PIR Motion INT D1 PIN 3 LIS2DH12 INT1 D6 PIN 4 LIS2DH12 INT2 A2 PIN 5 I3G4250D INT1 A3 PIN 6 I3G4250D INT2 ...

5.4 Insert LTE CAT-M1 or CAT-NB1 SIM card GPS antenna connector, J1 LTE antenna connector, P3 SIM Card slot, J14 ...

Connect the provided 5V DC adaptor to P6 and switch it on. D13 LED shall be lit to indicate the EVB is powered. 5.6 Connect to PC Connect P1 to your PC with a micro USB cable. This will provide a virtual COM port interface for AVT9152 to send and receive data to and from a terminal program. Virtual COM port driver can be downloaded from https://www.ftdichip.com/Drivers/VCP.htm. AVT9152 EVB ships with pre-programmed demo software (source code available at https://github.com/Avnet/AVT9152_DEMO). 5V DC Jack, P6 VDD_SUPPLY LED, D13 P1 ...

virtual COM port at 115200 baud rate, 8 data bits, 1 stop bit, no parity, no flow control. Press S2 to reset AVT9152’s nRF9160 in order to see the startup messages. S2 15-digit IMEI number Ex. 352656100004137 Application version Modem firmware version ...