Dell PowerVault MD3000i Getting Started
Text of the manual
FILE LOCATION: H:\Enterprise\Bulldog\DL1106 - Getting Started Guides\DAO-BCC - DY731A00\EN\fc.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/07 – FOR PROOF ONLY
Current template as of 4/26/2007
Model AMP01
Getting Started
With Your System
Guide de mise en route
Primeiros passos com o sistema
Procedimientos iniciales con el sistema
FILE LOCATION: H:\Enterprise\Bulldog\DL1106 - Getting Started Guides\DAO-BCC -
DY731A00\EN\title.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/07 – FOR PROOF ONLY
Model AMP01
Getting Started
With Your System
FILE LOCATION: H:\Enterprise\Bulldog\DL1106 - Getting Started Guides\DAO-BCC -
DY731A00\EN\title.fm
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use
of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data
and tells you how to avoid the problem.
CAUTION: A CAU
Getting Started With Your System
3
System Features
This section describes the major hardware and software features of your
system. It also provides information about other documents you may need
when setting up your system and how to obtain technical assistance.
Performance Features
•
667-MHz Intel® XScale® processor
•
512-MB high-speed data cache memo
Getting Started With Your System
Manageability and Serviceability Features
•
Efficient rack-mount designed storage system
•
Hot-pluggable drives
•
Four sensors for monitoring ambient temperatures
•
Over-temperature shutdown protection capability
•
Configuration and monitoring via the MD Storage Manager software
Supported Operating Systems
Your sy
Getting Started With Your System
5
•
CDs included with your system provide documentation and tools for
installing, configuring, and managing your system.
•
The Dell PowerVault MD Systems Support Matrix at support.dell.com
provides compatibility information, including servers, operating systems,
controllers, software, and hardware configurations.
•
Upda
Getting Started With Your System
Install the Rails and System in a Rack
Install the rails and system in the rack once you have read the "Safety
Instructions" located in the rack installation documentation for your system.
See your rack installation documentation for instructions on installing your
system in a rack.
Getting Started With Your System
7
Connect the Power Cables and Power Cord Retention Bracket
Connect both power cables to the power supply/cooling fan modules.
Attach the power cord retention bracket to the power supply loop by affixing
the back clasp of the bracket to the top of the loop and the middle clasp to
the vertical middle of the loop. Attach the sy
Getting Started With Your System
Plug the other end of the power cables into a grounded electrical outlet
or a separate power source such as an uninterruptible power supply (UPS)
or a power distribution unit (PDU).
Cable the RAID controller modules according to the instructions provided
in the Hardware Owner’s Manual.