Labgear LDL204 Installation Instructions
Text of Labgear LDL204 Installation Instructions
The name Labgear has been associated with quality signal
distribution since 1932 and the current range of amplifiers
continues to uphold that tradition. All LDL amps can carry
analogue and digital TV and radio, DAB, Freeview,
DVB-T and DVB-T2 HD TV signals and have:
• More efficient Switch-Mode Power Supplies
which run cooler
• Improved gain flatness delivering a better
balance across the performance range
• Lower noise figure for o
No of Inputs / Outputs
2 / 4
2 / 6
2 / 8
Frequency Range
VHF 87-230MHz & UHF 470-790MHz
Gain per port
10dB
10dB
10dB
Noise Figure
Typ. <4dB
Typ. <4dB
Typ. <4dB
Max Out put level (IMA3-60dB). EN50083-5
90dBuv
86dBuv
86dBuv
Isolation between outlets
20dB
20dB
20dB
Return Path Range
5-30MHz
Return Path Gain
6dB
6dB
6dB
All Ports IR Enabled
9V 15mA short circuit protected 5-30MHz
RED, EMC and LVD
Compliant
Built-in Power Su
Applications, and Installation
COMPLIANT
3
Applications
These amplifiers are designed to boost and distribute signals from the RF2 output of a satellite
receiver and or terrestrial TV and radio aerial signals. When using these amplifiers with a Sky
Digibox, the amplifier must be fed from the RF OUT-2 socket of the Digibox. However if the RF2
Channel is set to 59 or above (68 is usually the default channel) you will need to reset it to a
channel from 21-58
Labgear Reserve the right to modify their designs or specifications, In the light of future
developments, without prior notice. Performance figures quoted are typical and subject to
normal manufacturing and service tolerances.
This product is intended for use within the UK and Eire.
Declaration of Conformity
Hereby, Labgear declares that this amplifier for TV broadcast reception in domestic premises is in
compliance with the Radio Equipment Directive 2014/