JVC KD-SV3706 Instructions Manual

INSTRUCTIONS LVT1955-001A [U/US] KD-SV3706/KD-SV3705 VCD/CD RECEIVER KD-SV3706/KD-SV3705 KD-SV3706/KD-SV3705 ...

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/or invisible class 1M laser radiat ...

How to reset your unit ................................. 3 OPERATIONS Basic operations ........................................... 4 • Using the control panel ............................... 4 • Using the remote controller (RM-RK121) .... 5 • Changing the display information .............. 7 Preparation .................................................. 7 Listening to the radio ...

t Activate/deactivate the loudness setting. y Preset the station automatically [Hold]. u Plays/pauses. i Change playback mode—INT, RPT, RND. o • Select preset station. • Preset a station manually [Hold]. ; Change the color system. a Change the VCD audio channel. s AUX (auxiliary) input jack d Change the tuner reception mode. • Select stereo or monaural reception. • Select local or distance-extrem ...

• Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Installing the lithium coin battery (CR2025) Caution: • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Battery shall not be exposed to excessive heat such as sunshine, fire, ...

2 • Turn on the power. • Turn off the power. 3 Play repeatedly. 4 Turn on and off the OSD (On-Screen Display) on the monitor. 5 • Audio CD/VCD: Select a track. • VCD: Select the desired position. 6 Make selection/settings. 7 • Play/pause. • Confirm the selection. 8 • Tuner: Select the FM/AM band. • VCD: Change the color system. 9 Select the sound mode. p Select the sound setting item . q • Enter numbers . ...

On the Unit ONLY: 1 Turn on the power. 2 Change the source to tuner. Press the button repeatedly until the tuner frequency is displayed. 3 [Turn] = [Press] [Hold] Adjust the hour. 4 [Turn] Adjust the minute. • You can go back to the adjustment of the hour by pressing the button. 5 Finish the procedure. • To display the clock, press DISP repeatedly until the clock is displayed (see “Changing the disp ...

1 Change the source to tuner. Press the button repeatedly until the tuner frequency is displayed. 2 Select the band. F(FM) 1 F2 F3 A(AM) 1 A2 3 Search for a station to listen—Auto Search. When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search a station manually—Manual Search. Hold either one of the buttons until “M” appears on the display, then press it r ...

You can preset 6 stations for each band. Automatic presetting — SSM (Strong-station Sequential Memory) On the Unit ONLY: 1 Select the band you want to store into. 2 Local stations with the strongest signals are searched and stored automatically. [Hold] Manual presetting Ex.: Storing FM station of 92.50 MHz into preset number “4.” 1 Tune in to the station you want to preset. 2 Selecting preset station ...

On the Unit: On the Remote: • For audio CD, MP3 disc* or VCD without PBC only • For details about using number buttons, see page 6. • You can also use 4 / ¢ to select a track. * You can specify the tracks in the current folder. Selecting the next or previous folders (only for MP3 or WMA discs) • For MP3/WMA discs, see also “MP3/WMA control screen operations” on page 12. Playback Control (PBC) operations On the Rem ...

• For details about using number buttons, see page 6. • To select an item from the submenus, repeat this step. • To move to the next or previous page of the current menu, press 4/¢. • To return to the menu, press 7 on the remote controller. On-Screen operations Displaying the On-Screen information You can check the track number and elapsed playing time if the monitor is turned on. On the Remote ON ...

2 Folder name (ROOT)*1/track name (FILE)*1/track title (TITLE)*1 *2/performer (ARTIST)*1 *2/album name (ALBUM)*1 *2 3 Folder name*1 (only for MP3 discs) 4 Highlighted bar for the selected folder 5 Track name*1 6 Highlighted bar for the selected file *1 Some symbols will not be shown (or will be substituted with others) on the control screen. *2 Only for MP3: Appears only when an MP3 fi le have Tag information. ...

3 Enter track number. • For MP3/WMA: Enter a folder number (F), press #, then enter a track number (T). • For VCD/audio CD: Enter a track number. 4 Repeat steps 2 and 3 to program other tracks. 5 Start program play. • To clear the program, select “CLEAR” on the program screen, then press ENTER. The program is cleared, and the unit return to normal playback. Pressing 7 also clears the program. ...

You can connect an external component to AUX (auxiliary) input jack on the control panel. Connecting an external component to the AUX input jack 1 Select “AUX IN.” 2 — Turn on the connected component and start playing the source. 3 [Turn] Adjust the volume. 4 — Adjust the sound as you want (see page 15). • You can adjust the output level setting for the external component. See “Adjusting the ...

Selecting a sound mode You can select a preset sound mode suitable to the music genre. • Preset value for each sound mode is as follows: Mode Bass (BAS) Treble (TRE) Loudness (LOUD) ROCK +2 +3 ON POPS +3 +1 OFF CLASSIC +1 -3 OFF FLAT 0 0 OFF EQ OFF (Canceled) 0 0 — • Sound mode is automatically canceled (“EQ OFF” is selected) in the following cases: – When activating/deactivating loudness (see “ ...

• By pressing SRC on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a disc, playback will start from where it had been stopped previously next time you turn on the power. For MP3/WMA discs, playback will start from the beginning of the last playing track. General • If you change the source wh ...

reflectance of CD-RWs is lower than that of regular CDs. • Do not use the following CD-Rs or CD-RWs: – Discs with stickers, labels, or a protective seal stuck to the surface. – Discs on which labels can be directly printed by an ink jet printer. Using these discs under high temperature or high humidity may cause malfunctions or damage to the unit. Playing a VCD disc • The ...

Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 3). FM/AM • SSM automatic presetting does not work. Store stations manually. • Static noise while li ...

• Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names. • Noise is generated. Skip to another track or change the disc. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • Tracks do not play back in the order you ...

Single CD —8 cm disc Warped disc Sticker and sticker residue Stick-on label Unusual shape C-thru Disc (semi- transparent disc) Transparent or semi- transparent parts on its recording area How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage t ...