HiB Jupiter 43600 Manual
Text of HiB Jupiter 43600 Manual
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to ensure that
your product is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall.
Please Note Atomic & Electron cabinets must be installed with a minimum
distance of 150mm between the infra-red s
1. Atomic & Electron Only: Attach the
LED light fitting on the top of the cabinet
using the pre-drilled holes and the screws
provided. Push the male and female
electrical connections together until they
‘click’ (Fig. A).
2. Position the cabinet in a suitable location
and carefully mark the position of the top of
the cabinet using a soft pencil.
3. Remove the cabinet from the wall and
using a spirit level, mark a horizontal line
50mm b
Mercury & Jupiter
Wall Mounting (Fig C)
Door Adjustment (Fig D)
1
2
Shelf Assembly (Fig E)
Kore, Callisto,
Quantum, Atomic,
Electron & Nitro
Atomic & Electron are suitable for installation in zones: 2 & Outside Zones
All installations must comply with guidelines which are based on a zonal concept. The diagram above
illustrates this concept and must be followed to ensure the safe installation of electrical appliances in
the bathroom. These regulations apply to domestic installations only. Installations must be made in
accordance with the current IEE wiring regulations and relevant building regul