kd frames KD Lounger Twin Instructions
Text of kd frames KD Lounger Twin Instructions
(2) K-37-S SEAT SLAT - 37”
(2) K-37-L LOUNGER SLAT - 37”
(2) K-37-S SEAT RAIL - 37”
(8) K-33-M MIDDLE SLAT - 33”
(1) K-10-BL BACK LEG (Left) -10”
(1) K-10-BR BACK LEG (Right) -10”
K-29-P
K-15
H-19
2
(2) K-20-S SEAT SLAT CAP - 20”
(2) K-9-SL SEAT LEG - 9”
(2) K-37-B BACK SLAT - 37”
(1) K-29-P PROP CONNECTOR - 29”
(2) K-24-L LOUNGER RAIL - 24”
(2) K-11-L LOUNGER SLAT CAP - 11”
(2) K-9-
Be sure that the Props
are on the inside of the
Back Rails.
4
Be sure that the Prop
Connector
is below the
Back Rails.
Please double-check your work at
this time. Any error in this
assembly will cause serious
problems later.
H-8
Be sure that the Prop
Connector goes below
the Back Rails.
3
K-31-B
H-5
H-8
K-10-BL
K-10-BR
H-12
H-12
Attach the Left Back Leg (K-10-BL)
and Right Back Leg (K-10-BR)
to the outside of the Back Rails
using (2) 3-1/4” Cevis Pins (
Using (3) Middle Slats (K-33-M)
push the Wood Dowels
into the edge holes on
(2) Back Slat Caps (K-22-B).
K-22-B
K-37-B
Attach the Seat Legs (K-9-SL)
and the Lounger Rails (K-24-L)
to the Seat Rails using
(2) 3-1/4” Clevis Pins (H-12).
Secure the Clevis Pins with Hair Pins (H-5).
7
H-12
K-24-L
H-12
K-9-SL
K-9-SL
K-33-M
K-37-L
K-11-L
K-33-M
Make sure that the cut-away part of
the Seat Legs face out so that they
will support the Seat Rails.
10
Using (3
Push the Slat Decks down onto
the Wood Dowels and attach
with Wood Screws (H-19).
Knockdown Frameworks, Inc. warrants all of its products for five years against any defects that are due to
faulty materials or workmanship. We will promptly correct such defects by repair or replacement, at our option,
without charge. This warranty covers product defects only and will expire five years after date of purchase by the
o