Innowater pH PUBLIC Operating Manual

Text of Innowater pH PUBLIC Operating Manual

Before carrying out any installation or maintenance of the pH-Public, disconnect it

from the mains power supply. This appliance is not intended for use by persons (including children) that lack ex- perience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible person. The installation

2 pH Wireless

PAGE 1. Description ................................................................ 3 2. Installation ................................................................ 4 2.1. Mechanical and hydraulic installation ............................ 4 2.2. Electrical installation .....................................

The pH Public works to correct the pH level of your pool by injecting corrective acid

solution in the circuit. The device monitors the pH continuously by means of its pH sensor and sends a WIRELESS control signal to the pump which will, in turn, injects acid in the pool when needed. The device will control the speed of the pump de

4 pH Public

2. INSTALLATION 2.1. Mechanical and hydraulic installation During installation ensure that the mains cable is disconnected from the power supply. Acids are very corrosive and can harm you eyes, skin and airways. When working with pH correctors necessary caution and preventive measures should be taken. Always

Innowater Controller Owners Instructions: