INDRA Smart PRO Operation & User’s Manual

3 Introduction 4 Operation 6 Charging Cable Stowage 15 Technical Specifications 16 Troubleshooting 17 Servicing, Maintenance & Support 19 Models: 190105A101 Type 1 Tethered 190105A102 Type 2 Tethered 190105A103 Type 2 Socketed Important Safety Notes WARNING: Smart PRO charger installation must only be performed by a ...

delighted with the features, quality and user experience of the Smart PRO. This manual covers how to get started with your Smart PRO, explains key features, the troubleshooting tips along with important safety and warranty information. It is important that y ...

All you need to do is plug your EV in and go, it’s that simple. INDRA App At the end of the install process, you will also automatically receive a welcome email from INDRA with details of how to register for the INDRA App. The INDRA App is designe ...

Smart Mode The Smart PRO will operate in Smart Mode by default, automatically calculating your personalised charging schedule, every time you plug in. To do this the Smart PRO will use the information you provide in the INDRA App - for example your energy tariff and when you need your EV – to make sure your EV is ready when you need it ...

charged by each day. When the charger is in Smart Mode, it’ll make sure your car is ready to drive by these times. Vehicle Details To ensure scheduling is met, the associated battery capacity of your EV must be added. From the App dashboard, click on “M ...

Smart PRO can use surplus solar output to charge your EV, increasing your self-consumption. This can be set up within the INDRA App by navigating to “More” and then “Microgeneration”. Support & Frequently Asked Questions Although the INDRA App has been designe ...

NOTE: APPROPRIATE CHARGING CABLE STOWAGE IS ESSENTIAL TO PREVENT INADVERTANT TRIPS/ FALLS OR DAMAGE TO THE EV CONNECTOR Tethered Variants (190105A101 & 190105A102) • Disconnect the Smart PRO connector from your EV. Seek manufacturer guidance on how to do so, as this is often EV specific (Nissan Leaf disconnection is via the EV’s k ...

Overall Dimensions 200mm x 130mm x 420mm Weight 3.5kg (excluding cable) Technical Specifications Operating temperature -20℃ to 50℃ Charging Cable Length Up to 5m Operating humidity 10% to 85% Installation Indoor / Outdoor wall mounted Communications Ethernet or Cellular Netw ...

EV is not connected Plug in your EV to enable charging Where an untethered cable is being used, ensure the device end is plugged in first, before plugging the opposite end into the EV Charging Status Indicators White, Cycling Downwards Charging Mode The charger is currently charging your vehicle. Charg ...