Dell PowerVault MD1200 Getting Started

Text of the manual

MD1200 Storage Enclosures

Getting Started With Your System Guide de mise en route Introdução ao uso do sistema Introducción al sistema

MD1200 Storage Enclosures

Getting Started With Your System Regulatory Model Series E03J

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. ____________________ Information in

Getting Started With Your System

3 Installation and Configuration WARNING: Before performing the following procedure, review the safety instructions that came with the system. Unpacking the System Unpack your system and identify each item. Installing the Rails and System in a Rack CAUTION: If installed in a closed or multi-unit rack assembly, the operating

Getting Started With Your System

Connecting the Power Cable(s) Ensure that the power switch is in the OFF postion before connecting the power cables. Connect the system’s power cable(s) to the system. Securing the Power Cable(s) Bend the system power cable(s) as shown in the illustration and secure the cable(s) firmly to the bracket using the provided st

Getting Started With Your System

5 Turning On the System Press the power switch to the ON position. The power indicators should light. NOTE: Ensure that the storage enclosure is connected to the server and the mode switch set to split or unified mode before turning on the system. Installing the Optional Bezel Install the bezel (optional).

Getting Started With Your System

Other Information You May Need WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included within this document or as a separate document. • The rack documentation included with your rack solution describes how to install your system into a rack. • The Hardware

Getting Started With Your System

7 Technical Specifications Drives SAS hard drives Up to 12 3.5-inch SAS hot-swappable hard drives (3.0 Gbps and 6.0 Gbps) Enclosure Management Modules (EMMs) EMMs One or two hot-swappable modules with temperature sensors and an audio alarm Connectivity Configurations Support for either of the following configurations: • Uni

Other Storage Manuals