Atlanta 4500A Technical Manual & Parts Lists

362 Industrial Park Drive Lawrenceville, GA 30046 770-963-7369 • www.atlatt.com Technical Manual & Parts Lists Model 4500A Rev 1.6 Updated Jan 23, 2017 ...

ATLANTA ATTACHMENT COMPANY, INC. Confidential and Proprietary Information The materials contained herein are confidential and proprietary information of Atlanta Attachment Company. In addition to any confidentiality and non-disclosure obligations that currently exist between you and Atlanta Attachment Company, your use of these materials serves as an acknowledgment of the confidential and proprietary nature of these materials ...

Contents Important Safety Instruction ....................................................................................................................... 1 Liability ...................................................................................................................................................... 2 Safety Equipment on the Machines ......................................................................... ...

2.3. Operating Sequences .......................................................................................................................... 51 2.3.1 Standard Operating Sequences ........................................................................................................ 52 2.3.2 Changing the Needle on Sew Head 1 & 2 ....................................................................................... 55 ...

3.4.2. Sewing Troubleshooting ................................................................................................................. 86 3.4.3 Sewing Operation............................................................................................................................. 88 Thread breakage: Thread is melted by the heated needle ......................................................................... 88 ...

4500410 Pattern Sew Assembly ............................................................................................................. 124 4500420 Pattern Sew Sub Assembly ...................................................................................................... 125 4500138 Control Box Assembly ............................................................................................................. 126 450 ...

Signal Word! (Characterizes the severity of the danger) Note (describes the danger and informs how to proceed) Hazard warning sign: General Hazard Hand hazard sign or symbol Hazard warning sign: Electrical hazard, electrical hazard Designates a general, useful note. ...

1 Important Safety Instruction This part of the Instruction Material is provided for the safe use of your equipment. It contains important information to help work safely with the unit and describes the dangers inherent in machinery. Some of these dangers are obvious, while others are less evident. Mandatory Information All persons operating and/or working on the 4500 Single Lane Border Quilter should read and understand all ...

2 Liability The machine should only be operated when in perfect working order, with due regard for safety and the potential dangers, as well as in accordance with the Instruction Material. Faults and malfunctions capable of impairing safety should be remedied immediately. We cannot accept any liability for personal injury or property damage due to operator errors or non-compliance with the safety instructions contained in thi ...

3 A Word to the Operator The greatest danger inherent in our machines: is that of fingers, hands or loose clothing being drawn into a machine by live, coasting or rotating tools or assemblies or of being cut by sharp tools or burned by hot elements. ALWAYS BE CONSCIOUS OF THESE DANGERS! Safety Equipment on the Machines All machines are delivered with safety equipment, which shall not be removed or bypassed during operation. T ...

4 Protective Eyewear Protective eyewear that has been tested by the local authorities should be worn whenever there is a possibility of loose or flying objects or particles such as when cleaning the machine with compressed air. Tools Always count the number of tools in your possession before starting work on the machine. This will allow you to check that no tools have been left behind inside the machine. Never leave a tool in ...

5 Important Notices Reporting and Fighting Fires Read the instructions posted in the factory with regard to reporting fires and the emergency exits. Make sure you know exactly where the fire extinguishers and sprinkler systems are located and how they are operated. Pass on the corresponding information to the firemen when they arrive. Ensure there are enough signs to avoid fire hazards. The following fire extinguishers may be ...

6 - Kinetic energy - Note that some motors or spindles, for example, may continue to run or coast run on after being switched off. - Potential energy - Individual assemblies may need to be secured if necessary for repair work. Delivery of the Machine/Packaging Note any markings on the packaging, such as weights, lifting points and special information. Avoid temperature fluctuations. Condensation may damage the machine. Transp ...

7 Protect against influences from the surroundings: no structure-borne vibrations, no grinding dust, or chemical vapors. Protect against unauthorized access. Ensure that the machine and accessories are set up in a stable position. Ensure easy access for operation and maintenance (Instruction Manual and layout diagram); also verify that the floor is strong enough to carry the weight of the machine. Local Regulations Particular ...

8 Repair Replacement Parts We cannot accept any liability whatsoever for damage due to the use of parts made by other manufacturers or due to unqualified repair or modification of the machine. Repair, Electrical The power supply must be switched off (master switch off) and secured so that it cannot be switched on again inadvertently before starting any work on live parts. Those parts of the machine and plant on which inspecti ...

9 A Word to the End User The end user has sole responsibility to enforce the use of safety procedures and guards on the machine. Any other safety devices or procedures due to local regulations should be should be retrofitted in accordance to these regulations and/or the EC Directive on the safety of machines. Operator’s position must always be readily accessible. Escape routes must always be kept clear and safety areas shou ...

10 1. INSTALLATION MANUAL It is important that the machine operator read this manual and is familiar with all the functions and safety concerns of the unit before operating. 1.1. Parts and Components 1.- Material Roll Holder 2.- Multi-needle Quilter 3.- Sew Head 1 4.- Sew Head 2 5.- Material Puller 6.- Roll Winder 7.- Control Cabinet 1 2 3 4 7 U 6 5 ...

11 1.2. Technical Data Max Speed (sew heads 1 & 2) 3000 rpm Factory Preset Speed (sew heads 1 & 2) 2400 rpm Multi-needle quilter Max Speed 1200 rpm Max Border Width (finished) 18” Weight of Material Light/Medium Max Stitch Length 5 spi Needle System (sew heads 1 & 2) SNTVX7X140 Needle System (multi-needle quilter) SN328-22 Air Pressure 80~90 psi Voltage 208~240V 3PH 60HZ Current 30 Amps Motor Type AC, (3) Servo DC, (3) Efk ...

12 1.3. Installation & Set Up It is important that the machine operator read this manual and is familiar with all the functions and safety concerns of the unit before installing or operating. 1. Unpack the machine frame and install it with help of a suitably rated fork truck. (Suitably rated long forks or straps may be required for proper installation.). 2. Remove any shipping straps from machine. 3. Inspect the machine for ...