Fujitsu F2MC-8FX Series Operation Manual

MB2146-301 OPERATION MANUAL ...

ber: MB2146-301). The MB2146-301 is a development support tool for developing and evaluating applied products based on the F2MC-8FX family of microcontrollers manufactured by Fujitsu. This manual is intended for engineers who use the MB2146-301 (referred to below as ...

The following precautions apply to the product described in this manual. CAUTION Indicates a potentially hazardous situation which, if not avoided appropriately, may result in minor or moderate injury and/or damage to the product or the equipment to which the product is connected, to software resources su ...

• The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. • The information, such as descriptions of function and application circuit examples, in this document are presented sole- ly for the purpose o ...

MB2146-301 is the MCU board (model number: MB2146-301) mounting an evaluation MCU in the F2MC-8FX Family of Fujitsu 8-bit microcontrollers. To build an F2MC-8FX evaluation environment, combine three products: the header board, MCU board, and BGM adapter (model number: MB2146- 09). Figure 1 System configuration ■Product configuration Ta ...

The appearance of a MCU board and the part name are shown in Figure 2. Figure 2 MCU board appearance figure 2. Checking the Delivered Product Before using the MCU board, confirm that the following components are included in the box: • MCU board : 1 • Operation manual (English version, this manual) : 1 • Operation manual (J ...

Align the MCU board the header board facing each other, then plug their mating connectors together. Those connectors are provided with incorrect insertion prevention guards located diagonally. Posi- tion the two boards correctly so that the incorrect insertion prevention guards do not interfere ...

• Be sure to connect the BGM adapter connector (CN3) correctly. The BGM adapter connector and the LVD2 detection voltage selector jumper plug have the same shape (see “Figure 5”). The MCU board may break if the BGM adapter connector is accidentally plugged into the LVD2 detection voltage selector jumper plug (S2) on the other si ...

■How to the switch and jumper plug on a MCU board setup Please set the following switches referring to “Figure 6 The switch and jumper plug on a MCU board”. 1. Set the clock selector switch (SW1-1) to ON or OFF to disable or enable the subclock, respec- tively. 2. Set the clock supervisor selector switch (SW1-2) to OFF. 3. Set the APB ...

Mount the crystal or ceramic oscillator into the crystal oscillator mounting sockets (for the main clock and subclock) on the MCU board. The MCU board has one crystal oscillator mounting socket for the main clock and the other for the subclock. To distinguish them from each other, the board has the “MAIN CLOCK ...