Article NERA Assembly Instructions Manual
Text of Article NERA Assembly Instructions Manual
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having difficulty, our friendly Customer Care
team is always here t
Page 3 of 21
HARDWARE / TOOLS INVENTORY
ID
DESCRIPTION
QTY
WOOD DOWEL
8
DOUBLE COMPRESSION
FITTING ANCHOR
6
ALLEN KEY
1
M10 × 10MM SCREW
12
TEFLON PAD
2
THIN ALLEN KEY
1
M6 × 12MM BOLT
4
LONG COMPRESSION
FITTING ANCHOR
4
HARDWARE / TOOLS INVENTORY CONT.
ID
DESCRIPTION
QTY
SHORT COMPRESSION
FITTING ANCHOR
10
M8 × 8MM SCREW
14
M6 × 20MM BOLT
(4 PRE-INSTALL
Page 4 of 21
1A
× 8
× 6
Holes on double compression
fitting anchors (2) must be facing
inwards on headboard (A).
!
NERA Bed with Nightstands
BACK SIDE OF HEADBOARD
Page 5 of 21
1B
× 12
NERA Bed with Nightstands
Note orientation of holes
on side headboards (B/C).
Secure first 6 screws (4) into headboard (A) first
before attaching left and right side headboards (B/C).
!
!
BACK SIDE OF HEADBOARD
Page 6 of 21
NERA Bed with Nightstands
2A
× 2
First remove plastic backing
from teflon pads (5). Stick on
bottom side of headboard (A)
approx. 1/4” in from the edges.
!
FRONT SIDE OF HEADBOARD
Page 7 of 21
2B
NERA Bed with Nightstands
× 4
Use the 4 shortest bolts (7) provided.
Ensure center beam brackets (E)
are level when installed.
!
!
!