Gator TRADE Series Manual
Text of Gator TRADE Series Manual
7” Quad display AHD Monitor
with Heavy Duty AHD Camera
GT704HD
If you need assistance setting up or using your Gator product now or in the future, call Gator
Support.
Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
If you would like to download a digital copy of this manual, or other Gator manuals/software,
please visit the http://gatordriverassist.com website and click on
1. Power ON/Off
2. Camera input viewing modes.
3. Ch1 view (Menu-navigate)
4. Ch2 view (Menu-navigate)
5. Menu
6. Ch3 view (Menu-navigate)
7. Ch4 view (Menu-navigate)
8. Remote sensor
P1
P2
1 x Hi-Resolution Monitor
1 x CMOS camera
1 x Wire harness
1 x Sun shade
1 x U-bracket
4 x U-bracket screws
1 x Remote controller
Product structure
Inclusions
Monitor functionality & settings
NOTE: AHD monitors require AHD cameras
(Compatible cameras)
GT13AHD
GT18AHD
Mo
7 Pin Plug
Extra for Flat 12 Pin Plug
Pin
1
2
3
4
5
6
7
Pin
8
9
10
11
12
Connection
Left Indicator
Auxiliary or Reverse Light
Earth
Right Indicator
Electric Brakes
Stop Light
Tail Lights
Connection
Left Indicator
Auxiliary or Reverse Light
Earth
Right Indicator
Electric Brakes
Colour
Yellow
Black
White
Green
Blue
Red
Brown
Colour
Orange
Pink
White
Grey
Violet
Common Trailer pin configurations (Always check your individual trailers wiring in case its not st
Note: When connecting the main harness
to the monitor, firmly press together to
ensure plug is fully recessed.
P5
P6
Quad wiring diagram
* Trailer Kit Model
GTTKIT
**Extension Model
PLC5
PLC10
PLC15
PLC20
*** Add on Camera Models
GT13AHD
GT18AHD
GND
+12V acc
AV2
Monitor
AV2
Trigger
AV2 Trigger connect to
reverse bulb. Refer diagram
for fnding polarity. (Fig1)
10 metre extension included
AV 3 trigger
connect to left
signal bulb1
AV3
AV4
Trigger
AV1
Trigger
How to find reversing wires to trigger or power backup camera systems.
We recommend that you wire up the triggers as the last part of your installation (after the
systems monitor has been wired) this is so that you can use the system as a safe way to test
for a reversing wire.
Back up camera systems (reversing camera systems) require a signal to “Trigger” the system
into action so that it automatically operates when the vehicle is in reverse.
Whilst so
Scan the QR code to go to our website. Click on the icon for a full schematic wiring
diagram to suit your installation.
Note: Additional cameras and wiring may be required depending on your
application, compatible products are available on our website.
This system comes with one camera as illustrated above, however it is capable of
running up to 4 cameras and can cover a very large array of vehicle requirements.
The following