Boss TPSRF51 Instruction Manual

(7 day, 5/2 day and 24 hour programme options) Thank you for purchasing this product. If installing for someone else, please ensure that the instructions are handed to the householder. Please read this manual prior to installation or use. Always isolate the m ...

emitting diodes (LEDs). The switch allows you to turn off the Receiver if necessary to prevent it calling for heat. The top LED (orange) will illuminate when the switch is in the “On” position and the unit is receiving power. The bottom LED (green) illuminates ...

Changes to the jumper settings should only be made by the Engineer carrying out the installation or other qualified person. The installer should select the jumper positions required if changes need to be made to the factory default settings. These jumpers are found on the rear of the Control Unit. Jumpers Description Address co ...

however many factors can affect the RF transmission and shorten the operating distance, e.g. shielding by thick walls, foil back plasterboard, metal objects such as filing cabinets, general RF interference, etc. The range is generally large enough for most household a ...

Indicator Function 1 Day of week indicator 1. show the current day in normal mode 2. show the program day in program mode 2 Real time clock 1. show the current time 2. show the set time during program mode 3 Temperature 1. show the room temperature in the resolution of 0.5°C 2. show the set temperature during program mode in the re ...

Default Operation Mode Setpoint Mode Default settings Comf mode 21°C Econ mode 16°C Off mode 5°C Default Clock and Operation Mode Item Default values Clock 12:00AM Day of week Monday Mode AUTO Program 5/2 days Default Program Setpoint Temperatures Program Weekday (Mon to Fri) Weekend (Sat to ...

the Week will change continuously. • To set the hour, press H repeatedly to step through. Press and hold the key, the numbers will change continuously. • To set the minute, press M repeatedly to step through. Press and hold the key 2 ...

• During AUTO mode, the programmed temperature can be adjusted manually by pressing the or buttons. The setting will flash for 5 seconds, then return to the home screen. • This temperature override is cancelled at the next programmed temperature change. • During Temporary Override mode, the program number is not displayed ...

the temperature setting of the last period as the current setting i.e. use 21°C in our example. New Program 1 Time: 06:30am Temp: 21°C 2 Time: 1:00pm Temp: 18°C 3 Time: 1:00pm Temp: 23°C 4 Time: 1:00pm Temp: 21°C 5 Time: 6:00pm Temp: 21°C 6 Time ...

• Temperatures exceeding the measurement range (0.0°C - 35°C) will be indicated by “HI” and “LO”. Control Status Indication: Heating indicator is displayed when the heat channel is switched ON. Low Battery • When battery voltage below 2.4V, the ...