U-Line 2115R Installation Instructions Manual

Service & Parts Tech Lines Phone (800) 779-2547 • FAX (414) 354-5696 [email protected] ©2006 U-Line Corporation 08/2006 Full Overlay Door Panel Preparation and Installation Instructions for 2175, 2115 & CLR2160 Models ...

Door Panel Preparation A full overlay door panel completely covers the doorframe and handle to give a built-in appearance. See your U-Line dealer for the optional Full Overlay Door Panel Kit. 2175 Models: P/N U-OL2175B -- Black P/N U-OL2175W -- White 2115 & CLR2160 Models: P/N U-OL2115B -- Black P/N U-O ...

1. Remove the door shelves by first pulling shelves up at a 45° angle, then straight out. 2. Remove top hinge screw pin (Phillips screwdriver). Remove the door by tilting forward and lifting off the bottom hinge pin. 3. Pull door gasket out of the groove (top edge of door only) ...

with the Full Overlay pivot plate (see Figure 8). IMPORTANT Door panel and overlay panel must be aligned properly or the door will not operate correctly. Assembling the Door 1. Install the assembled panel by sliding the original door panel back into the doorframe. 2. Replac ...

and greased to ensure proper operation. 5. Place the modified door onto the pivot post. 6. Position door and install the pivot post into the top hinge (using the Phillips screwdriver). 7. Adjust door as needed for proper closure. 8. Check to see that light goes ...

Publication No. 30137 08/2006 Rev. D U-Line Corporation, located in Milwaukee, WI, is a family operated manufacturer of built-in undercounter icemakers, Combo® icemaker/refrigerators, Wine Captain® wine storage units, refrigerators, refrigerated drawers and refrigerator/freezers. For more than four decades, U-Line has distinguishe ...