Argos 01DDPENT1008-V2 Manual
Text of the manual
10x8 & 12x8 Pressure treated pent shed
2mm Drill bit
x2
Winter = High Moisture = Expansion
Summer = Low Moisture = Contraction
All building’s should be
erected by two adults
For ease of assembly, you
MUST pilot drill all screw
holes and ensure all screw
heads are countersunk.
For assistance please contact customer care on: 01636 880514
Mercia Garden Pr
Gable Left &
Right
Floor
QTY 2
Door
QTY 2
Roof
QTY 2
Strip - 12x56x2144mm QTY 7
Strip - 12x301684mm QTY 6
Roof Block - 27x44x160mm QTY 7
Roof Support - 27x44x2238mm QTY 3
Eaves Frame - 10x8: 1546mm QTY 4
(28x28)
12x8: 1819mm QTY 4
T-Hinge QTY 6
Turn Button
Pad Bolt
Plastic Window Cill
Styrene - 550x5
Step 3: Window side assembly
Cut 7x (No.9) strips to 515mm and secure
4x (No.9) strips to the inside of the window
gap using 2x20mm screws per strip.
*Ensure the strips are fush with the framing.
Place the plastic cill (No. 16) on top of the board
and rest the styrene (No. 17) in the window gap.
Measur
Place a roof support bar (No. 11)
inbetween the framing on the
door side and plain side, aligning
with the top of gable. Mark the
position with a pencil.
Fix the roof blocks (No. 10) to the
door and plain panels in line with
the pencil mark and secure using
2x50mm screws per block.
Place the roof support on top of
the blocks and fx in place wi
Cut the felt into 3 sheets and lay
onto the roof.
* Ensure there is approximately
50mm of overhang around the
building.
Fix into place using 219x felt tacks
at 100mm intervals.
219xFelt Tacks
Felt
tacks
Felt size: 10x8 - 3220mm
12x8 - 3760mm
18
18
18
18
Step 12
Measure the side of the roof,
cut 2x (No. 18) facias to size
and fx in place using 3x3
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
P 6
Please retain product label and instructions for future reference
Please retain product label and instructions for future reference