Crate&Barrel Casement Manual
Text of Crate&Barrel Casement Manual
800.967.6696 | crateandbarrel.com
Made in China- r03
English
This page lists the contents included in the box. Please
take time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Français
Cette feui
800.967.6696 | crateandbarrel.com
Made in China- r03
2/7
Casement Tall Cabinet / Meuble de Rangement Haut / Gabinete Alto
1
800.967.6696 | crateandbarrel.com
Made in China - r03
3/7
Casement Tall Cabinet / Meuble de Rangement Haut / Gabinete Alto
Method to adjust shelves
Méthode pour ajuster étagères
Método para ajustar estantería
NOTE: Please do the following to adjust shelf height.
ATTN: Veuillez suivre les instructions suivantes pour régler la hauteur de l'étagère.
NOTA: Por favor haga lo siguiente para ajustar la altura de la repisa.
2
800.967.6696 | crateandbarrel.com
Made in China - r03
4/7
NOTE: Please do the following if the unit is not level.
ATTN: Veuillez suivre les étapes ci-dessous si le meuble
n'est pas à niveau.
NOTA: Por favor haga lo siguiente si la unidad no esta
nivelada.
Casement Tall Cabinet / Meuble de Rangement Haut / Gabinete Alto
3
Made in China - r03
5/7
Casement Tall Cabinet / Meuble de Rangement Haut / Gabinete Alto
4
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over, install tip restraints
per instructions. To further reduce the risk of serious injury and death from tip-overs:
• Place heaviest items in the lowest compartments or drawers.
• Unless specifically designed to accom
Made in China - r03
6/7
Casement Tall Cabinet / Meuble de Rangement Haut / Gabinete Alto
5
Wall Mounting Instructions
1) Using screws provided and a screwdriver, secure mounting plate(s) to the back of product.
2) Noting the location of the product's mounting plate(s), mark and drill holes on the wall for mounting plate(s). Drill pilot
holes into marked positions and into a wall stud. NOTE: if wall studs are not