Denver DVBT-43 Operation & User’s Manual

Text of the manual

USING THE SET TOP BOX

1 2 3 4 First Time Installation Volume Control Channel Scan Setup Menu Tools EPG(Electronic Program Guide) Media Player Recording and Timeshifting 4 4 5 6 6 7 7 10 SPECIFICATIONS CONTENTS

*Do not overload wall outlets, extension cords or convenience

receptacles beyond their capacity, since this can result in fire or electric shock. *Do not use unsuitable (unprotected) power outlet,this may be dangerous. *Check the connection regularly. If there is any rupture or failure in the insulation of the cable and the unit, disconnect immedia

27.Blue Button/PVR Manage

28.Yellow Button 16.Stand-by on/off 17.MUTE 18.RECALL 19.EXIT 20.VOL+ or RIGHT 21.PAGE DOWN 22.FAV 23.EPG 24.TTX 25.REC INTRODUCTION 1.Numeric entry 2. MENU 3. CH+ or UP 4. VOL- or LEFT 5.OK (confirm) 6.PAGE UP 7.CH- or DOWN 8.TV/RADIO 9.INFO 10.AUDIO 11.SUB T 12.PLAY 13.PAUSE 14.Red Button/FB 15.Green Butt

1. First Time Installation

1. When the Set Top Box is switched on for the first time, a "Welcome Page" will be displayed. 2. Use the arrow keys to select the "Region" and "OSD Language". 3. Move highlight to "Search" button and press "OK" to begin the channel scan. 2. Volume Control Use the "VOL+" and "VOL-" keys to increase or de

4. Setup Menu

Press the"MENU" key to activate the main menu. Select the "Setup" option and press the "OK" key to enter the menu. Change the OSD Language Change the TV system: PAL/NTSC/AUTO. mode; 4:3 LB, 4:3 PS, 16:9PB , 16:9AUTO. Timer Setting: for more information, refer to the next section. Setting OSD attribute Parent Lock Setting: Channels or Menu opera

6. EPG(Electronic Program Guide)

Press the "EPG" key to display all the information of the Channels. The following operations can be used in the EPG menu: Switch List: Press "2" to switch between program list and event list Play Booking: Select the Event and Press "OK" to book for play REC Booking: Select the Event and Press "REC" to boo

8. Recording and Timeshifting

An USB disk is needed to record and to use the timeshifting function. 8.1. Recording After pressing the [REC] key, the recording begins and a "REC" bar appears. For the Recording or Time shift functions, a USB High Speed disk is needed. 1 hour video recording will need about 2Gbytes space. (The storage space is related to the pr

8.2 Timeshifting ( 512MB minimum free space)

If you set timeshift to "OFF" and you press pause button, the program will be paused only. To activate the Timeshifting function, you need to confirm that the "TimeShift" in "Main Menu*Media+*PVR configuration* is "On". The video data will be stored in the "Timeshift Buffer". When the Set Top Box is in timeshiftin

Other TV Receiver Manuals