FFC LAF1142 Operator And Parts Manual

� SERIAL�NUMBER:�___________________� Manual�Number:��MR15533� � �� Part�Number:��LAF1142� � � MODEL�NUMBER:�___________________� Rev.�2 OPERATOR’S�AND�PARTS� MANUAL LOG�GRAPPLE 2-09-09 ...

INTRODUCTION ....................................................................................................... 3 GENERAL INFORMATION ....................................................................................... 3 SERIAL NUMBER ..................................................................................................... 3 OWNER AND OPERATOR SAFETY INFORMATION SAFETY STATEMENTS .................... ...

built to effi ciently lift and transport logs, and other loads for which a standard bucket or pallet fork may not be suited. You or any other person who will be assembling, operating, maintaining, or working with this product are required to read and completely understand the information and instructions contained in this manual. ...

MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH. DANGER THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY. WARNING THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH ...

WARNING! PROTECT AGAINST FLYING DEBRIS Always wear proper safety glasses, goggles or a face shield when driving pins in or out, or when any operation causes dust, flying debris, or any other hazardous material. WARNING! LOWER OR SUPPORT RAISED EQUIPMENT Do not work under raised booms without supporting them. Do not use support material made of concrete blocks, logs, buckets, barrels or any other material that c ...

WARNING! DO NOT MODIFY MACHINE OR ATTACHMENTS Modifications may weaken the integrity of the attachment and may impair the function, safety, life, and performance of the attachment. When making repairs, use only the manufacturer’s genuine parts, following authorized instructions. Other parts may be substandard in fit and quality. Never modify any ROPS (Roll Over Protection Structure) or FOPS (Falling Object ...

Obey all the safety instructions listed in this section and throughout this manual. DANGER! DO NOT USE THE LOG GRAPPLE TO LIFT ROUND BALES! DANGER! GRAPPLE MOVES QUICKLY! • Do not stand near or place extremities near grapple or between grapple and implement. ...

The diagram on this page shows the location of the decals used of the FFC Log Grapple. The decals are identified by their part numbers, with reductions of the actual decals located on the following page. Use this information to order replacements for lost or damaged decals. Be sure to read all decals before operating the attachment. They contain information you nee to know for both safety and product longevity. I ...

WARNING! READ MANUAL PART # 50-0724 WARNING! HIGH PRESSURE FLUID PART # 50-0737 WARNING! PINCH POINT PART # RDL3125 WARNING! CRUSH HAZARD PART # RDL3103 WARNING! FALLING LOAD PART # RDL3139 SAFETY INSTRUCTIONS ...

IMPORTANT Exceeding any of the maximum recommended prime mover/loader specifications CAN result in damage to this product and WILL void all FFC warranties. DESCRIPTION SPECIFICATIONS Lift Capacity of Prime Mover's Loader 6,400 lbs. maximum Hydraulic Pressure Output 4,000 psi. maximum Rear Ballast As required to maintain full prime mover stability. (Note the shipping weight of your model, then see ...

GENERAL TORQUE SPECIFICATION TABLES � ������������������������������������������������������������������������������������������������� given. Always use grade 5 or better when replacing bolts. SAE BOLT TO ...

WARNING! READ MANUAL PRIOR TO INSTALLATION Improper installation, operation, or maintenance of this equipment could result in serious injury or death. Operators and maintenance personnel should read this manual, as well as all manuals related to this equipment and the prime mover/loader thoroughly before beginning installation, operation, or maintenance. FOLLOW ALL SAFETY INSTRUCTIONS IN THI ...

Read all safety decals and safety statements in all manuals before beginning any Log Grapple hydraulic connection. Know and obey all OSHA regulations, local laws, and other professional guidelines for your operation. Know and follow good work practices when assembling, maintaining, repairing, mounting, removing, or operating this equipment. Two hydraulic hoses will be requi ...

Refer to your machines operator's manual for attachment operation. POSITIONING • Be aware of how the load’s weight is distributed. • Open grapple. • Always make certain that forks are completely under the load before lifting. • For well balanced loads: • Position forks so that the load is centered on the forks. • Close grapple. • For unbalanced lo ...

Know your equipment’s capabilities, dimensions and operations before operating. Visually inspect your equipment before you start, and never operate equipment that is not in proper working order with all safety devices intact. Check all hardware to ensure it is tight. Make certain that all locking pins, latches, and connection devices are properly installed and secured. Remove and replace any damaged, ...

10 3 9 11 2 17 15 16 12 14 13 7 5 8 1 6 4 8 10 10 ...

ITEM QTY. LAF1142 DESCRIPTION 1 1 LAF1160 Main Frame Weldment 2 1 LAF1161 Grapple Weldment 3 2 LAF3100 Upper Cylinder Pin 4 2 LAF3098 Grapple Pivot Pin 5 2 LAF3099 Lower Cylinder Pin 6 2 1049 Grade 5 Hex Head Cap Screw .38" x 2.5" 7 2 1048 Grade 5 Hex Head Cap Screw .38" x 2.25" 8 4 1837 Grade 5 Lock Torque Nut .38" 9 2 RHW1041 Grade 8 Hex Head Cap Screw .25" x 2" 10 8 6616 Grease Zerk .25"-28 tpi Self-tap 11 2 16 ...

in material and/or workmanship during the Warranty Period, in accordance with and subject to the terms and conditions of this Limited Warranty. 1. Excluded Products. The following products are excluded from this Limited Warranty: (a) Any cable, part that engages with the ground (i.e. sprockets), digging chain, bearing, teeth, tampi ...