Brink Air Control Ventilation Installation Regulations

T. +31 (0) 522 46 99 44 F. +31 (0) 522 46 94 00 [email protected] www.brinkclimatesystems.nl Modifications reserved Art.nr.: 614884-C 1 - Brink Air Control - Ventilation 2 - Brink Air Control - Allure The Allure manual starts after page 32 of the Ventilation manual STORE NEAR THE APPLIANCE ...

1.1 Description Brink Air Control- Ventilation. . . . . . . . 3 1.2 Symbols used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Technical specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 General product specification. . . . . . . . . . . . . . . . . . 4 2.2 Environment influences. . . . . . . . . . . . . . . . . . ...

Dear client, Thank you for buying the Brink Air Control- Ventilation. This user’s manual contains all required information to quickly become familiar with the product. We kindly request you to carefully go through this information before using the product. This user’s manual is intended for the Brink Air Control- Ventilation installer and end user. You can retrieve the required information from the user’s manual via the table of content ...

2.1 General product specification Product description Name: Brink Air Control- Ventilation Technical product specifications Electricity: 15 to 24 Volt Power consumption: 1,5 Watt Protection class: IP30 Power reserve: > 48 hours Ambient conditions Ambient temperature: 0 °C to 50 °C Storage temperature: -20 °C to 60 °C Humidity: 10% to 90% Other: Exclusively for indoor use 2.2 Environment influences The Brink Air Control- Ventil ...

The Brink Air Control- Ventilation has a number of buttons with which the device can be operated: 1 2 3 4 5 = = = = = Setting knob Return key Setting & activating timer programme Manual control key Bypassing the timer programme 2.4 Overview display version main screen 1 2 3 4 5 6 7 8 = = = = = = = = Flow rate indicator eBus connection indicator Fan indicator Fault symbol Filter message Current time block Current time Curre ...

The Brink Air Control- Ventilation has four ventilation modes. You can activate a ventilation mode yourself (for more information see ® Description of operation; manner of use page 15 ). You can adjust every ventilation mode yourself (for more information ® Setting ventilation mode values page 21 ). You can retrieve the set values at the Device information menu (see below). Ventilation modes 1 2 3 = = = Device information HRU-applia ...

safety instructions 3.1 General Warning! The installation and assembly activities required to commission your Brink Air Control- Ventilation should be performed by an installer approved by Brink Climate Systems B.V. Immediately remove the power from your Brink Air Control- Ventilation by removing the connected device’s plug from the socket, if: ▪ Parts of the Brink Air Control- Ventilation lie open, are pierced or had falle ...

Careful! Clean the screen with a soft cloth. Never apply water and/or (cleaning) liquid to the screen. 3.5 For the environment Take note! The Brink Air Control- Ventilation may not be removed as unsorted urban waste, but should be treated separately. Make enquiries within your own region, where the Brink Air Control- Ventilation can be handed in when use has been terminated. Do not throw away electrical devices or parts, but check if ...

performed by the installer) Assembly and installation should be performed by an installer approved by Brink Climate Systems B.V. 4.1 Assembly You should perform the steps, described in paragraph (® Disconnecting the operational module from the wall bracket page 9) through paragraph (® Replacing the operational module in the wall bracket page 10), one by one, to assemble the Brink Air Control- Ventilation. 4.1.1 Disconne ...

The following actions should be performed to connect the Brink Air Control- Ventilation electrically: ▪ Feed the two-core wire (from the device to be connected) through via opening at the back of the wall bracket. ▪ Check that the cables’ ends have been stripped in the correct manner. If this is not the case, do so. ▪ Screw the cable to the terminal No. 1 and No. 2. Consult the installation instructions of the device to ...

You can set the language in which the menus are presented. Perform the following actions to set the language: ▪ Press returnkey "2" as many times as necessary to get to the main screen, ▪ Press setting knob "1"; ‘Main Menu’ opens, ▪ Select ‘Basic Settings’ by turning setting knob "1", ▪ Press setting knob "1";‘Basic Settings’ opens, ▪ Select ‘Language’ by turning setting knob "1", ▪ Press ...

You can set the time. The time is visible on the main screen. The Brink Air Control- Ventilation only has 24 hour representation. Perform the following actions to set the time : ▪ Press returnkey "2"as many times as necessary to get to the main screen, ▪ Press setting knob "1"; ‘Main Menu’ opens, ▪ Select ‘Basic Settings’ by turning setting knob "1", ▪ Press setting knob "1"; ‘Basic Settings’ opens, ▪ Select ‘Cloc ...

You can set the date. The date is visible on the main screen. Perform the following actions to set the date: ▪ Press returnkey "2" as many times as necessary to get to the main screen ▪ Press setting knob "1"; ‘Main Menu’ opens ▪ Select ‘Basic Settings’ by turning setting knob "1" ▪ Press setting knob "1"; ‘Basic Settings’ opens ▪ Select ‘Date’ by turning setting knob "1" ▪ Press setting knob "1" ‘Date’ op ...

You can choose the device you want to regulate with the control if multiple devices are connected to Brink Air Control- Ventilation. Proceed as follows to set the appliance selection: ▪ Press return key "2" as many times as necessary to get to the main screen, ▪ Press setting knob "1"; ‘Main Menu’ opens,, ▪ Select ‘Installer’ by turning setting knob "1", ▪ Press settin ...

of use You can increase or decrease the ventilation mode with the Brink Air Control- Ventilation. You can do this by setting a program. You can temporarily override the program while it is running. 5.1 Navigation: general description Navigating through menus The Brink Air Control- Ventilation has menus that you can navigate through. For this you use setting knob "1" . You scroll through the menus by turning the setting kn ...

You can choose the device you want to regulate with the control if multiple devices are connected to Brink Air Control- Ventilation ( ® Selecting a device connected to the Brink Air Control- Ventilation page 14 ). 5.3 Weekly programmes P1, P2 and P3 You can programme the regulation of the ventilation mode in a weekly program. You can choose from programs P1, P2 and P3. Program P1 With ...

▪ Press returnkey "2" as many times as necessary to get to the main screen, ▪ Press setting & activating time program knob "3"; ‘Setting & activating timer programme’ opens, ▪ Select ‘P1: week’ by turning setting knob "1", ▪ Press setting knob "1"; ‘P1: week’ opens. You have a choice from ‘Period 1’, ‘Period 2’, ‘Period 3’, ‘Period 4’, ‘Period 5’ and ‘Period 6’. Every period is a part ...

▪ Press returnkey "2" as many times as necessary to get to the main screen, ▪ Press setting & activating time program knob "3"; ‘Setting & activating timer programme’ opens, ▪ Select ‘P2: week/weekend’ by turning setting knob "1", ▪ Press setting knob "1"; ‘P1: week/weekend’ opens. You can choose between ‘Week’ and ‘Weekend’. With ‘Week’ you can set a day program for Monday through Friday. With � ...