Faber Blokhus Installation Manual

3 < < < < 1.0 1.1 1.2 1.3 1.4 1.5 1.6 A B C ...

6 < < < < 1 Dear user Congratulations on your purchase of a Faber fire! A quality product from which you will experience warmth and atmosphere for many years. We recommend that you read this manual carefully before using the fireplace. If any problem arises despite our strict quality control, you ca ...

7 < < < < 3 Installation requirements 3.1 Appliance  This appliance may not be installed in a chlorine-containing environment. (Pools etc.).  When using the extension modules, keep a minimum distance of 250 millimeters to the ceiling.  Minimal distance to combustible materials: o Rear side ...

8 < < < < 4.2 Electrical connection Install a 230VAC/50Hz wall socket near the fireplace for connecting the control unit. See fig. 1.8a for the wiring diagram of the Blokhus: A= Adapter (6V) B = LED Symbio-Module C = Receiver D = Ignition pin E = Gas valve See fig. 1.8b for the wiring diagram of the ...

9 < < < < 5 Removing glass 5.1 Front glass  Remove the front panel. This is possible by slightly lifting the panel and pulling the bottom towards you (fig. 1.1 and 1.2).  Remove all glass clamps (fig. 1.3).  Remove the front glass. (fig. 1.4). For replacing the glass repeat the steps in rev ...