Epson EB-W16SK Startup Manual

on top of the other, and then project as one image. Please read this guide before getting started. ...

Superimpose images from two projectors to project as one image (stack projection). By using this stacked projection, you can realize a brighter, clearer image. This also allows large screen projection of 3D images that can be viewed by a large audience. Stacking Two Projectors ...

3 This device comes equipped with a function that allows you to easily superimpose two images. See "Projecting Images" on page 14 for more information on superimposing images. Project stunning 3D content from media such as 3D Blu-ray discs or 3D games. Easily Superimposing Two Images Projecting Realistic 3D Images 3D Glasses (supplied) (option ...

To secure polarizer M3 screws (2) Projector and stacker mount (commander) Projector and stacker mount (receiver) Remote control Polarizers (2) AA manganese batteries (for remote control) Adjustable feet (3) Marking sticker Password protect sticker Startup Guide ...

When two projectors are assembled in a stacked configuration (one on top of the other), the projector on top is called the “Commander”, and the projector on the bottom is called the “Receiver”. When suspended from a ceiling, the projector on top is the receiver, and the projector on the bottom is the commander. ...

You need to use a supplied USB cable to link the commander and the receiver. A Audio-L/R port E USB(TypeA) port I Computer1 port M Rear feet B Video port F USB(TypeB) port J Monitor Out/Computer2 port N Ceiling mount fixing points (three points) C S-Video port G HDMI port K Audio Out port O Front adjustable foot D Power ...

mount (ELPMB23) when suspending the projectors from a ceiling. See the User's Guide supplied with the ceiling mount for more information on attaching and installing the ceiling mount. * Special expertise is required to suspend the projector from a ceiling. Contact your local dealer or the nearest address provided in ...

polarizers. Press until they click into place. Attach the front foot (one) and the rear feet (two) to the base of the receiver. Turn the feet to extend and retract to adjust the horizontal tilt. Carefully remove the protective tape from the stack angle adjustment screws, and then remove the scre ...

right) Attach the commander to the receiver. Place the commander's screws into the gap in the receiver's mount, and then tighten the screws. (on the left and right) D Secure the stacker angle adjustment section with screws. There are screw holes numbered 1 to 4 on the left and right o ...

receiver You need to connect a USB cable to link the commander and the receiver. Connecting Equipment Commander Commander Receiver Receiver USB cable (supplied) Power cable (supplied) Power cable (supplied) Power inlet Power inlet A Plug in the power cables for the commander and the receiver. B Connect the comm ...