Everet EVP220 Operation & User’s Manual

3 2. Dial Switch Settings (at the bottom of the camera) 4 PRODUCT HIGHLIGHTS 5 TECHNICAL SPECIFICATIONS 6 CAMERA INTERFACE 8 CAMERA DIMENSIONS 8 IR REMOTE CONTROLLER 9 VISCA IN（RS232 PORT) 11 VISCA PROTOCOL 13 PART1 CAMERA RETURN COMMAND 13 PART2 CAMERA CONTROL COMMAND 13 PART3 CAMERA CONTROL COMMAND 18 VISCA PAN TILT ABSOLUTE POSITION VALUE 21 VISCA PAN ...

2. For your safety, always keep this manual with the camera. 3. The camera power input range is 100-240 VAC (50-60Hz), ensure the power supply input within this rate before powering on. 4. The camera power voltage is 12VDC, rated currency is 2A. We suggest you use it with the original power supply adapter supplied by the factory. 5. Please keep the power cable ...

Camera 1 Power Adapter 1 Power Cable 1 RS232 Control Cable 1 USB 3.0 Cable 1 Remote Controller 1 QUICK START 1. Check all cable connections before power on. 3 WWW.EVERETIMAGING.COM ...

Dial Switch（ARM） SW-1 SW-2 Instruction 1  OFF OFF Updating mode 2  ON OFF Debugging mode 3  OFF ON Undefined 4  ON ON Working mode Dial Switch SW-3 SW-4 Instruction 1  OFF OFF reserve 2  ON OFF reserve 3  OFF ON reserve 4  ON ON reserve Dial Switch (USB) SW-5 SW-6 Instruction 1  OFF OFF Working mode 2  ON OFF Updating mode 4 WWW.EVERETIMAGING.COM ...

● High end 12x optical zoom, 2x digital zoom lens with 72.5 degree field of view ● IP, HDMI, 3G-SDI, USB video outputs interface ● White Balance, Exposure, Focus, Iris can be adjusted automatically or manually ● Support POE: ​easy to use one RJ45 cable to get video, control and power supply ● Special Focusing Algorithm: fast and precise focusing per ...

1280*720@1~30 / 1027*576@1~30 / 640*360@1~3 ...

Minimum Lux 0.1 lux White Balance Auto/Indoor/Outdoor/Manual/Auto/Sodium Lamp Auto/Sodium Lamp Exposure Auto/Manual/Bright/Shutter/Iris Focus Auto / Manual Iris Auto / Manual Electric Shutter Auto / Manual Gamma Supported WDR Supported BLC Supported 2D/ 3D Noise Reduction Supported Anti Flicker OFF/50Hz/60Hz Pan Tilt Flip Supported Input Voltage DC12V / POE Dimension 220mm×190mm×173mm Net Weight 1.4KG（3.1LBS ...

4.Power Indicator Light 5.Dial Switch 6. Tripod Screw Hole 7. Installation Hole 8. RS232 control port (input) 9. RS232 control port(output) 10. HDMI port 11.3G-SDI port 12, USB port 13, RJ45 port 14. DC12V plug CAMERA DIMENSIONS 8 WWW.EVERETIMAGING.COM ...

POWER Under normal working mode, short press POWER key, to enter standby mode; Press it again, the camera will do self-configuration, then go back to HOME position. It will go to preset position if power on model has been set before. FREEZE​ ​（Not Supported in USB） Short press FREEZE key to freeze/ unfreeze the image. IRT (IR Transfer/IR Pass) Open / close the IR pass function. Once press the IRT key, the camera will receive an ...

Manual focus, only valid under manual focus model. ZOOM KEY( ON THE RIGHT SIDE) Set the zoom rate NAVIGATE KEY: UP/DOWN/LEFT/RIGHT Under working mode, use navigate key to set the pan tilt, and select menu when enter OSD. OK /HOME KEY Under working mode, short press OK to make the camera go back to HOME position; and confirm the selection when enter OSD. AF: Auto Focus MF: Manual Focus RESET: Press 3 seconds to reset camera MENU: En ...

VISCA IN & Mini DIN Connection Camera VISCA IN Mini DIN 1 DTR 1 DSR 2 DSR 2 DTR 3 TXD 5 RXD 4 GND 4 GND 5 RXD 3 TXD 6 A(+) 6 NC 7 IR OUT 7 NC 8 B(-) 8 NC No. V_IN V_OUT 1 DTR DTR 2 DSR DSR 3 TXD TXD 4 GND GND 5 RXD RXD 6 A 7 IR OUT 8 B VISCA IN RS485 6 A (+) 7 IR OUT 8 B (-) VISCA IN & DB9 Connection Camera VISCA IN Windows DB-9 1 DTR 6 DSR 2 DSR 4 DTR 3 TXD 2 RXD 4 GND 5 GND 5 RXD 3 TXD 6 A(+) 7 IR OUT 8 B(-) 11 WWW.EVERETIMAGING.CO ...

SERIAL PORT CONFIGURATION: Parameter Value Parameter Value Baud rate 2400/4800/9600/115 200 Stop Bit 1bit Start Bit 1 bit Check Bit None Date Bit 8 bit 12 WWW.EVERETIMAGING.COM ...

Ack / Completion Message Command Packet Note ACK z0 41 FF Returned when the command is accepted. Completion z0 51 FF Returned when the command has been executed. z = camera address+8 Error Messages Command Packet Note Syntax Error z0 60 02 FF Returned when the command format is different or when a command with illegal command parameters is accepted Command Not Executable z0 61 41 FF Returned when a command cannot ...

OFF 8x 01 04 06 03 FF Combine Mode 81 01 04 36 00 FF Combine with optical zoom control Separate Mode 81 01 04 36 01 FF Separate with optical zoom control Stop 81 01 04 06 00 FF Enable In separate mode Tele (Variable) 81 01 04 06 2p FF Enable In separate mode Wide (Variable) 81 01 04 06 3p FF Enable In separate mode Direct 81 01 04 46 0p 0q 0r 0s FF Enable In separate mode CAM_Focus Stop 8x 01 04 08 00 FF Far(St ...

CAM_RGain Reset 8x 01 04 03 00 FF Manual Control of R Gain Up 8x 01 04 03 02 FF Down 8x 01 04 03 03 FF Direct 8x 01 04 43 00 00 0p 0q FF pq: R Gain (0~0xFF) CAM_Bgain Reset 8x 01 04 04 00 FF Manual Control of B Gain Up 8x 01 04 04 02 FF Down 8x 01 04 04 03 FF Direct 8x 01 04 44 00 00 0p 0q FF pq: B Gain (0-0xFF) CAM_AE Full Auto 81 01 04 39 00 FF Automatic Exposure mode Manual 81 01 04 39 03 FF Manual Control mode Shut ...

Down 8x 01 04 0D 03 FF Direct 8x 01 04 4D 00 00 0p 0q FF pq: Bright l Positon (0~0x1B) CAM_OverallBright Direct 8x 01 04 A4 00 00 0p 0q FF pq: Bright l Positon (0~0x0F) different with AE BRIGHT CAM_WDR On 8x 01 04 3D 02 FF Exposure Compensation ON/OFF Off 8x 01 04 3D 03 FF Direct 8x 01 04 D3 pq FF pq: ExpComp Position (0~0x6) CAM_BackLight(BLC) On 8x 01 04 33 02 FF BackLight On Off 8x 01 04 33 03 FF BackLight Off CAM_Sharpness Res ...

pq :Zoom speed 0x01~0x07 CAM_ZoomDisplay On 8x 01 06 C2 02 FF Off 8x 01 06 C2 03 FF CAM_IRaddress IR address 8x 01 06 D8 0p FF p:IR address 1~4 CAM_Gamma Gamma set 81 01 04 5B 0p FF P:Gamma NO. (0~6) CAM_MountMode UP 8x 01 04 A4 02 FF Mount Up Down 8x 01 04 A4 03 FF Mount Down CAM_ColorGain Direct 8x 01 04 49 00 00 00 0p FF (0~0x0E) CAM_2D Noise Reduction Direct 8x 01 04 A5 0p FF 0 – OFF 1 – ON CAM ...

IR(remote commander)receive ON/OFF Off 8x 01 06 08 03 FF On/Off 8x 01 06 08 10 FF Pan_tilt Drive Up 8x 01 06 01 VV WW 03 01 FF VV: Pan speed 0x01 (low speed) to 0x18 (high speed) WW: Tilt speed 0x01 (low speed) to 0x14 (high speed) YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD) Down 8x 01 06 01 VV WW 03 02 FF Left 8x 01 06 01 VV WW 01 03 FF Right 8x 01 06 01 VV WW 02 03 FF Upleft 8x 01 06 01 VV WW 01 01 FF Upright 8x 01 06 ...

y0 50 00 FF Auto y0 50 01 FF Indoor mode y0 50 02 FF Outdoor mode y0 50 03 FF OnePush mode y0 50 04 FF ATW y0 50 05 FF Manual CAM_RGainInq 8x 09 04 43 FF y0 50 00 00 0p 0q FF pq: R Gain CAM_BGainInq 8x 09 04 44 FF y0 50 00 00 0p 0q FF pq: B Gain CAM_AEModeInq 8x 09 04 39 FF y0 50 00 FF Full Auto y0 50 03 FF Manual y0 50 0A FF Shutter priority y0 50 0B FF Iris priority y0 50 0D FF Bright CAM_ShutterPosInq 8x 09 04 4A FF y0 50 00 ...