BMC AMS42/84-LAN Manual 

Functional diagram All-In-One Measurement System. Compact or 19 inch. The AMS42/84-LAN, a complete solution: am- plifier technology and data acquisition. A net- work data acquisition system is already inte- grated. Available in a robust aluminum housing as a mobile tabletop unit (AMS42-LAN) with skid-proof, ...

ules. b) Carefully push the cassette along the guide bars of the relevant slot until the 7-pole pin connector of the cassette and the pins of the 5B module are plugged into the corresponding connectors on the AM ...

3 Connections All available connectors and operating ele- ments of the AMS42/84-LAN are accessible on the right-hand side of the device front. 3.1 Switch The AMS42/84-LAN is turned on (press "1") and off (press "0") with the switch. The green LED indicates the operation of the device. 3.2 LEDs The two LEDs on the front of ...

The AMS device is supplied with power (9..40V) via the 3-pole DIN plug. A power supply unit ZU-PW70W (24V, 2.92A DC) is optionally available. Pin Assignment 1 n. c. 2 ground (GND) 3 9-40V DC 3.5 Analog channels 8 (AMS42-LAN) or 16 (AMS84-LAN or AMS42-LAN with option AMS-EXT8) analog signals can be con- nected to the ampli ...

The AMS42/84-LAN features 4 digital outputs (low: 0V..0.7V; high: 3.0V..5V). All connections are led to the 15-pole Sub-D female con- nector on the back of the device. The pin assignment is as follows: Pin Assignment Pin Assignment 3 DOut 1 14 Sync IN 4 DOut 2 15 Sync OUT 11 DOut 3 7, 8 Sync GND 12 DOut 4 1, 2, 6, 9, 1 ...

The AMS -backplane provides 8 slots for 5B modules and the AMS-K-xxx plug-in cassettes (see chapter 8.2) carrying the 5B modules. In the AMS84-LAN, two backplanes are integrated. If the AMS42-LAN is used with the optional add-on AMS-EXT8 (see chapter 8.4), eight slots each are available at the front and at the back of the ...

All software and documentation available for the AMS42/84-LAN are integrated on the "Software Collection" CD included with delivery. When inserting the CD, a CD starter opens automatically (otherwise: start openhtml.exe). AMS42-LAN Change to the product page of the AMS42/84-LAN by selecting the en ...

Windows® Start menu after installation. 6.1.2 Operation In the left window of the program screen, all DAQ systems with a working network connection to the PC are listed displaying their IP addresses. The IP address shown is the last ...

� Network and Internet � Network and Sharing Center � Connections: Local Area Connection � button "Properties" � item "Internet Protocol Version 4 (TCP/IPv4)" � button "Properties" � TAB "General � Start � Control Panel � dialog "Network Connections" � Local Area C ...

The device perfectly goes together with the modern data acquisition and analysis program NextView®4: � different versions (Demo, Live!, Lite, Professional, Analysis, Client/Server) available � unlimited number of devices (even of different type) can be installed (except for: NextView®4 Lite) � confi ...