Airsight XX36A Operation & User’s Manual

1.1 FEATURES ................................................................................................................................................................................. ...

connectivity and a powerful web server to bring clear pictures to your Desktop from anywhere on your local network or over the Internet. The main function of the camera is to transmit remote video over IP network. The high qualit ...

1.3.1 Front View Figure 1.1 Light Sensitive Hole: For light sensitive photocell. Infrared LEDs: For night Vision. LENS: CMOS sensor with fixed focus lens. (Default is 6mm, 3.6mm optional). Antenna: WI-FI Antenna. Sliding Shell: For protection from sun and waterproofing. 1.3.2 Connections Figure 1.2 ...

data is transferred. RJ45 Port: RJ-45/10-100 base T, connect the network cable here. Power Jack: DC 5V/2A power supply. RESET BUTTON: Press and hold the RESET BUTTON for 30 Seconds to reset the camera back to the factory default settings. (Please keep the p ...

(Figure: 1.9). 5. When the power is on and the network cable is connected, the green LED on the rear panel will stay on. The yellow LED will keep flashing, and the Indicator LED on the front of the camera will flash. (The indicator LED can be ...

will be displayed on your desktop. CAUTION: Before installing and using the product, please read the following precautions carefully and make sure they are fully understood. Use only the power adaptor included with the product. Use of an unauthorized power adapter may cause damage to ...

2.1 IP Camera Tool When the Device has been mounted properly, you can double-click the Icon “IP Camera Tool” and a dialog box as Figure 1.9 will pop up. Figure 1.9 Note: The software searches IP Servers automatically over your LAN. There are 3 cases: 1. No IP Cameras found within LAN. After about 1 minute search, the Result Fi ...

There is some device information in the Basic Properties, such as Device ID, System Firmware Version, and Web UI Version.（Figure 2.1). The Device ID is the camera’s MAC ID, which should be the same as shown on the sticker on the bottom of the camera. Every camera has a unique MAC ID. So if there are many IP address ...

camera will have a dynamic IP. (Make sure the Router which the camera connects to has DHCP function and DHCP is enabled). (Figure 2.2). Figure 2.3 IP address: Fill in the IP address assigned and make sure it is in the same subnet as the Gatew ...