Cheyenne BE1058-ORB-COM Assembly Instructions Manual
Text of Cheyenne BE1058-ORB-COM Assembly Instructions Manual
DO NOT RETURN THIS ITEM TO THE STORE OR CONTACT THE RETAILER
In the unlikely event that you should have a problem with your merchandise, o
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
r you are missing
p
1) BOLT (14 PCS)
1/4” x 1 3/16”L
A) LEFT SIDE BOTTOM
FRAME (1 PC)
B) RIGHT SIDE BOTTOM
FRAME (1 PC)
C) LEFT SIDE UPPER
FRAME (1 PC)
D) RIGHT SIDE UPPER
FRAME (1 PC)
2) MOUNTING SCREW (2 PCS)
3) PLASTIC ANCHOR (2 PCS)
4) ALLEN WRENCH (1 PC)
5) Cap (4 PCS)
6) SCREW (2 PCS)
NOTE: Phillips head screwdriver required
but not provided.
DO NOT RETURN THIS ITEM TO THE STORE OR CONTACT THE RETAILER.
Please contact our dedicated custo
F) LOWER BACK
FRAME (2 PCS)
E) UPPER BACK
FRAME (1 PC)
G) METAL SHELF
(3 PCS)
H) BOTTOM SUPPORT
BAR (1 PC)
I) BACK EXTRA
4 3/16” TUBE (2 PCS)
J) FRONT EXTRA
4 3/16” TUBE (2 PCS)
Page 3
DO NOT RETURN THIS ITEM TO THE STORE OR CONTACT THE RETAILER.
Please contact our dedicated customer service team at 1-800-737-5267 or email
[email protected] to request parts or assistance with your
merchandise. Office hours: Monday -
Step 2 :
Step 3 :
DO NOT RETURN THIS ITEM TO THE STORE OR CONTACT THE RETAILER.
Please contact our dedicated customer service team at 1-800-737-5267 or email
[email protected] to request parts or assistance with your
merchandise. Office hours: Monday - Friday from 8:00 AM - 6:00 PM - (Eastern Time Zone)
Attach the metal shelves (G) x3
to the side frames (B+D) using
bolts (1) x6. Only tighten bolts halfway.
Insert upper and lower b
Due to variations in bathroom styles, this
Space Saver is height adjustable.
For a shorter Space Saver:
Attach the bottom support bar (H) to the
space saver frame using bolts (1) x2. Only
tighten bolts halfway.
Insert the four foot caps (5)x4 to right and
left bottom sideframe (A+B) .
Now fully tighten all the bolts from step 1~4.
For a taller Space Saver:
Insert the Front Extra Tubes (J)x2 into the
front left and right side of frame (A+B) and
fasten wit
A. If mounting into drywall:
1. Drill two 1/4” pilot holes into dry wall.
2. Firmly press plastic anchors (3) into pilot holes.
3. Insert mounting screws (2) into holes in left and right side frames (C) & (D) and screw firmly into
plastic anchors using phillips head screwdriver (not provided).
B. If mounting to studs in wall:
1. Insert mounting screws (2) into holes in left and right side frames (C) & (D) and screw directly int
**Warning: Serious or fatal injuries can occur from furniture tip-over.
To help prevent furniture tip-over:
- Use provided mounting hardware to secure furniture to the wall. This may reduce butnot eliminate the risk of
furtniture tip-over.
- Do not allow children to climb on furniture.
- Keep remote controls, toys, and other items that might attract children off of this product.
- Unless specifically designed to accommodate, do
not set televisions or other
INSTRUCCIONES DE ENSAMBLE
Pagina 1
CHEYENNE PRODUCTS
**
**
Parte# BE1058-ORB-COM/BE1058-WHT-COM/BE1058-GLD-COM/
BE1058-NKL-COM
UPC# 05027699528-9/05027699529-6/05027699530-2/05027699531-9
ESTE LIBRETO DE INSTRUCCIONES CONTIENE INFORMACIÓN DE SEGURIDAD CRUCIAL.
POR FAVOR LEA Y AGUARDE PARA REFERIR EN EL FUTURO.
NO REGRESE ESTE PRODUCTO A LA TIENDA O CONTACTE AL DISTRIBUIDOR
En caso de que tenga un problema con su mercancía o que falten piezas o
1) TORNILLOS (14 PZAS)
1/4” x 1 3/16”L
A) MARCO INFERIOR DE
LADO IZQUIERDO (1 PZA)
B) MARCO INFERIOR DE
LADO DERECHO (1 PZA)
C) MARCO SUPERIOR DE
LADO IZQUIERDO (1 PZA)
D) MARCO SUPERIOR DE
LADO DERECHO (1 PZA)
2) TORNILLOS PARA MONTAR (2 PZAS) 3) ANCLAS DE PLASTICO (2 PZAS)
4) LLAVE ALLEN (1 PZA)
5) TAPA (4 PZAS)
6) TORNILLOS (4 PZAS)
Ensamble en superficie suave para prevenir daño al acabado del producto.
**
**
**
**
N