Adaptivation Voice Pal Pro Instructions Manual

Instructions INTRODUCTION Congratulations on purchasing your VoicePal Pro. It is one of the most affordable and functional digital communication aids available. Adaptivation strives to offer our clients products and follow-up support that meets the highest quality standards in the assistive technology field. Feel free at any time to contact our offices or your local dealer for assistance on using your new VoicePal Pro. These instructi ...

• Message selection using external switches including Adaptivation's Taction Pads or Pal-Pads. • Front pouch allows insertion of customized overlays. • When 2, 3 or 4 message selection is used, front panel buttons are combined to form physically larger buttons. • Variable delayed activation of messages. • Automatically goes to "sleep" after a message repeats 10 consecutive time ...

Continue holding the Record button until the Record LED goes solid (about two seconds), then release. The VoicePal Pro is now in record mode. 2. Get ready to talk, then press and hold button #1. Speak clearly about 12 inches away from the VoicePal Pro microphone (MIC). 3. When you are done talking, release button #1. (NOTE: As long as you are touching the but ...

buttons #4, #5, #9 and #10 activate message 2. There is a natural "dead space" in the area of buttons #3 and #8. 4. Record new messages as decribed earlier. Note: When switching between 2, 3, 4, and 10 message modes, it is best to re-record the messages since the VoicePal Pro re-configures its memory each time. Please remember the Quick Start Guide is only intended to let y ...

Pro can be in one of two states: Setup state, and Active state. The Setup state is used to program various options that affect the way the VoicePal Pro operates. TheVoicePal Pro is placed in the Active state by placing SW1 in the ON position. To record messages or to play them back, the VoicePal Pro must be in the Active state. The VoicePal Pro is placed in the Setup stat ...

Press button 1-10 to attach selected relay to corresponding message. Press REC to detach selected relay from all messages. OFF ON ON ON ON Duration of Message OFF ON ON OFF ON 0 Second Delay OFF ON OFF ON ON 2 Second Delay OFF ON OFF OFF ON 6 Second Delay Relay B Control Press button 1-10 to attach selected relay to corresponding message. Press REC to detach selected relay from all messages. ON OFF ON ON ON Duration ...

#2 selects message one. Pressing button #4 or #5 selects message two. Pressing button #6 or #7 selects message three. Pressing button #9 or #10 selects message four. Each message can be up to 15 seconds (22 with the 90 second model). The space between the right and left halves is intentional dead space. Three Messages: SW1=ON (Active state), SW3=ON, SW4=OFF. Pressing button #1 or ...

You are now in record mode. Step 3: To record a message, press and hold the desired front panel button or external button, and begin speaking. Release the button when the message is complete. Step 4: Press and hold the REC button until the flashing record LED turns off. The VoicePal Pro is now in playback mode. Repeat Mode: When a message is selected, usually one releases the button once t ...

Step 3: Set SW2 through SW6= ON, ON, ON, OFF, ON Step 4: Press Record button once. The LED will flash. Sets delayed activation to ½ second. Step 5: Set SW1 = ON Returns VoicePal Pro to Active state. Step 6: Return SW2 through SW6 to their previous settings. Press and hold a button for at least ½ second to activate a message. The same procedure would be used to configure for other delayed acti ...

ensure that all previous programming is eliminated and won't interfere with your attampts to program the relays. To clear the relays: 1. Place the Pro in the Setup state (SW1=OFF). 2. Set SW2 through SW6 = ON, OFF, OFF, OFF, OFF. 3. Press all the buttons (1-10) once. 4. Return to the Active state (SW1=ON). Reinforcement Delay: This refers to the amount of time between ...

Places VoicePal Pro in the Setup state Step 4: Clear relays by setting SW2 through SW6 = ON, OFF, OFF, OFF, OFF. Press each button (1-10). Erases any previous relays.. Step 5: Set SW2 through SW6 = OFF, ON, ON, ON, ON Sets relay A to duration of message. Step 6 : Press button 1. Record LED will flash. Attaches Relay A to message 1. Step 7: Set SW1 = ON Places VoicePal Pro to the Active s ...

Step 4: Clear relays. Step 5: Set SW2 through SW6 = OFF, ON, ON, OFF, ON. Sets up relay A for 0 second delay. Step 6: Press button #1. Attaches relay A to message 1. Step 7: Set SW2 through SW6 =ON, OFF, ON, ON, ON. Sets up relay B for duration of message. Step 8: Press button #2. Attaches relay B to message 2. Step 9: Set SW1 = ON Returns VoicePal Pro to the ...

Step 4: Clear relays Step 5: Set SW2 through SW6 = OFF, ON, ON, OFF, ON Sets up Relay A for 0 second delay. Step 6: Press button #1. Record LED will flash. "Attaches" relay A to message 1. Step 7: Set SW2 through SW6 = OFF, ON, OFF, OFF, ON Sets up Relay A for a 4 sec delay. Step 8: Press button #2. Record LED will flash. "Attaches" relay A to message 2. Step 9: Set SW1 ...

Step 6: Press button #4 "Attaches" Relay B to message 4. Step 7: Set SW1=ON Places the VoicePal Pro in Active state. Step 8: Return SW2 through SW6 to their previous settings. When message 4 is selected, the message will play and 6 seconds later Relay B will activate the switch latch timer and the toy. Factory Settings: You may program as many of the features described at a time as you wish. Wh ...

desired keypad button. The keyguard helps prevent inadvertent activation of the keypad. Keyguards are available in 2, 3, 4, and 10 message formats. Carrying Case: The VoicePal Pro has a custom designed carrying case available to help protect it from bumps, spills, and other hazards. The carrying case can be hung over the shoulder or worn around the wa ...

Record button and the keypad buttons at the same time. Messages are quiet or have too much background noise. • Speak clearly and loudly, no less than 12 inches away from the unit. • Are you near a source of electrical noise? Such as: Power lines, automobile engine, electrical motor, certain electronic equipment, air conditioners, etc. If so, increase the distance of the Voi ...

misused, abused, altered, or tampered with. At the end of the warranty period, Adaptivation shall be under no further obligation expressed or implied. This warranty gives you specific rights, and you may also have other rights which vary from state to state. For repair service, contact Adaptivation's technical dept.to receive the required RMA # (Return Merchandise Authorizat ...