BCP SKY5232 Instruction Manual
Text of BCP SKY5232 Instruction Manual
Please retain these instructions for future reference.
HARDWARE
1
28 PCS
M6 x 35mm
SCREW
M6 x 15mm
SCREW
M6 x 12mm
SCREW
2
8 PCS
3
12 PCS
TOOLS REQUIRED
APPROXIMATELY
40 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
125 LBS
TABLE
CAPACITY
LBS
250 LBS
CHAIR
CAPACITY
LBS
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Do not lean backwards when sitting in chair.
• Firmly secure all
Attach part A left arm and part B right arm to part C
backrest with four part 2 screws and four part 5 washers.
NOTE: Fasten screws loosely during assembly. Do not
firmly tighten screws until item is fully assembled.
PRODUCT ASSEMBLY - CHAIR
x4
2
x4
5
B
A
C
Attach part D seat with six part 1
screws and six part 5 washers.
3
Carefully flip chair over.
Attach part E inner frame with four part 1 screws and four part 6 nuts.
PRODUCT ASSEMBLY - CHAIR
x4
1
x6
5
x6
1
6 x4
E
D
PRODUCT ASSEMBLY - CHAIR
4
Attach part F base with four part 1 screws, eight part 5 washers, four part 4 spring washers, and
four part 6 nuts.
5
Flip chair onto its base. Place a part G seat cushion and part H back cushion.
Repeat steps 1 to 5 to build another chair.
x4
1
x4
6
x4
4
x8
5
F
H
G
PRODUCT ASSEMBLY - TABLE
1
Attach four part I table legs to part J tabletop with eight part 3 screws and eight part 5 washers.
2
Attach part K table shelf with four part 3 screws and four part 5 washers.
| 7
x8
x4
3
x4
3
x4
5
x8
5
I
K
J