EEG iCap HD492 Manual 

EEG Enterprises, Inc. 586 Main Street Farmingdale, New York 11735 TEL: (516) 293-7472 FAX: (516) 293-7417 Copyright © EEG Enterprises, Inc. 2021 All rights reserved. ...

1 Copyright © 2021 EEG Enterprises, Inc. All Rights Reserved. ...

Introduction 4 Product Description 4 List of Features 5 Encoder Setup 5 Quick Network Setup 5 Video Input/Output 6 Test Captions 6 Setting Audio Levels 7 Accessing Your Encoder’s Web Interface 8 Security Modes and Password Protection 8 Setting Date & Time 8 Updating Your Encoder 9 iCap Setup and Testing 10 Lexi Setup and Testing 14 Other ...

3 Copyright © 2021 EEG Enterprises, Inc. All Rights Reserved. ...

solution. The HD492 iCap Encoder has iCap and Lexi access as well as modem redundancy capabilities built right into the unit. No external equipment or audio couplers are needed to use the HD492 Encoder – Simply follow ...

To use iCap or Lexi and to access further features on the encoder’s web interface, you must first select Network Settings from the front panel LCD menu and set up the encoder on your network. ✔ Use a Static IP address on your network to assign the Encoder (recommended). It doesn’t have to be, and in most cases should n ...

Your program audio source is typically embedded in the standard video input to your encoder. Audio may also originate from a separate Analog or AES source (XLR connector input to encoder). To send this program audio to captioners through iCap, you must first configure the audio settings through the front panel menu of the encoder. From t ...

Your Encoder’s web interface can be accessed through any computer on your local network and controls many of your encoder’s applications, configurations, and features (see Security Settings and Password Protection below for instructions on how to secure access to the web interface). You will see it referenced many ...

Before updating you must first download the latest update file for your encoder model from the product updates section of our website https://eegent.com/support/product_updates Once you have downloaded the latest version for your encoder model you can apply it to the encoder either through the web interface OR the front panel USB port / ...

This section will walk you through a basic test run of iCap and point out the important information your captioner needs from you to get started. For sections that require you to access the iCap admin site – iCap Admin credentials are supplied by EEG at the time of encoder purchase/rental along with your unique access code and is acc ...