EFG Solo Quick Start Manual

Text of EFG Solo Quick Start Manual

CAUTION & INFORMATION

Make sure no obstacles are in the desk’s path. Make sure the desktop is not touching any walls. Make sure all cords are appropriate length to accommodate the change in height. Keep children away from electric height-adjustable desks, control units and handsets. There is a risk of injury and electric shock. Keep all electrical components away from liquids. Do not sit or stand on the desk frame. Do not crawl or lie under the desk fram

Lay out all components and hardware to ensure that you have all the components

and hardware listed on the parts page. Place the Top Mounting Bracket (part 7) to the unedrsid of the desktop. If you would like the Leg (part 4)centered in the desktop front to back,place the back edge of the Top Moun- ting Bracket (part 7)2.95”behind the desktop center.(see inset) Using the supplied Allen Wrench,install the leg (part 4) to the Foot (part 3) with fou

Make sure no obstacles are in the desk’s path.

Make sure the desktop is not touching any walls. Make sure all cords are appropriate length lo accommodate the change in height. IMPORTANT: You must RESET the desk prior to use. RESET PROCEDURE: Press and hold the DOWN button on the Handset (part 3) until the desk reaches ils lowest height. Release the DOWN button. Press and hold the DOWN button again until the LED display reads ”RST”. Release the DO

PROGRAMMING (some models)

Press the DOWN button on the handset (part 7) until the base reaches its lowest position. Press and hold the DOWN button again until the LED display reads ”RST”. Press and hold the 1 button (about 5 seconds) while the LED flashes ”RST” and then switches to either: 10.1 = One-Touch 10.2 = Constant-Touch Release the l button. Press the l button again until the desired setting is reached. Once the chosen setting is displayed,

EFG Indoor Furnishing Owners Instructions: