EKKO EP18D Series Manual
Read Online
Read the EKKO EP18D Series Manual online using the built-in PDF viewer.
Key Pages of Document
Note: Before using must read this manual and the various warning label! EKKO Material Handling Equipment Manufacturing, Inc. ...
industrial pollution and improve productivity, we develop new series of SL15GF walkie Electric Pallet truck on the basis of absorption of the advantages of domestic & overseas battery Pallet truck, they are especially suitable for cargo loading and unloading, handling, stacking, etc of food, bank, light textile, station, port, logistics and other enterprises ...
2.Proper usage.....................................................................................................................2 Modification............................................................................................................................... 2 3.Introduction of the product................. ...
lifting system and new ac controller, at same time it is equipped with high quality motor, lithium battery and pump station motor. It has the characteristics of superior performance, convenient operation, flexible steering, reliable braking, good dynamic performance, less noise, less pollution and beautiful appearance. This series truck is s ...
This is a walkie type electric pallet truck with autonomous control, lifting and lowering is controlled by the handle button. Improper use may cause personal injury or machine damage. Operators or operating companies need to ensure proper using, The Truck needs to be used in a firm, flat, intact surface and suitable surface, the truck is designed for indoor use at room temp ...
3.1 Model Overview This specification is for EP18D series 4000LBS walkie type electric pallet truck(Herein after referred to as “Truck”). The type is“EP18D—18, which load capacity is1.8T-4000LBS” meets the requirement of JB/T8452-1996《Battery forklift model establishment method》. 3.2 Model ...
(in) 24 Wheel base (in) 53 Lowered fork height (in) 3.3 Lifting height (in) 7.7 Overall length (in) 67.2 Overall width (in) 27.5 Fork size (in) 2/6/48 Outside distance of fork (in) 27 Turning radius (in) 55 Lifting speed, laden/unladen (in/s) 0.8/1.1 Lowering speed, laden/unladen (in/s) 1.5/1.5 Max. Gradient performance laden/unladen (%) 8/15 Brake type electromagnetic ...
actions like walking, turning, pallet fork lift, etc. 1.Switch for lifting and lowering 2. Switch for driving 3.Belly switch 4.Horn ...
to alternating current that make the truck walk. Walking speed is achieved by variable frequency control of motor speed and controlled by the accelerator. Gear box in the factory has been posited enough gear lubricating oil. And please change the gear lubricating oil every 1000 hours under normal circumstances. Gear bo ...
the handle is released, the handle automatically moves to the upper braking area (' B ') and the vehicle stops until it stops. Belly switch (3) can prevent the operator will be squeezed, when vehicles are driven towards (' Fw) encounters an obstacle, body touch belly to slow down or start to switch vehicles (' Bw) driven a short distance, then stop. If the handle ...
The main working part of truck is fork, which are used to carry the pallet or cargo transportation and short distance transportation. The operating handle controls stretch of oil cylinder, and the pump station provides pressure oil. 5.5 Electric System The electrical system includes walking and operation control. The truck use AC electric control assembly.。 The meter has a battery indicator. When the battery power is too low, the e ...
valve block, has been debugging good, before they go out after they leave the our company after-sales personnel or professional maintenance personnel are strictly forbidden to adjust themselves, so as to avoid safety accident. 6.Electrical Schematic Diagram ...
instrument panel. 8.1 Start, run and parking: 1).Insert the key into the key switch, turn to the right, pull the emergency power safety switch up, open the control circuit. 2).Forks rise above ground about 10 cm 3).Open the travel switch slowly, till the requested speed 4).Any fault of the truck happening during operation, need to cut off the powe ...
Press the horn button in the center of handle to notify people around. 8.4 Battery capacity indicator The stacker battery capacity indicator has electricity capacity display function. 8.5 Handling stacking operation 1). How to transport the goods pile on weight Will forklift drive to the front of the items which need to carry slowly , make fork parallel to the ground, lifting the fork to height, it can be inserted into the ...
and the driving speed of the vehicle shall not be changed. All parts supplied by the original manufacturer are subject to strict quality inspection. To ensure the safety and reliability of the vehicle, please use the original accessories. Replacement parts, including all oil, must be collected and processed in accordance with local environmental ...
state(wheels must be replaced in pairs, i.e. replace right wheel together with left one). Lifting chain and rollers: Chain and rollers will be worn quickly without good lubrication. Perform periodic lubrication according to following maintenance table. Shorten the lubrication period under adverse operation conditions (such as in dusty and hot environment). Hydraulic oil ...
— Check the nuts on the wheels, and tighten them if necessary. — Check the hydraulic components for leakage, and tighten them if necessary. —Replace the hydraulic filter. ...
accumulator The truck must be parked in a safe location before any operation on the accumulator. 9.4.1 Maintenance Technician Battery charging, maintenance and replacement must be operated by qualified professionals. The user manual, supply preparation and charging requirements must be carefully read before the preparation operation. 9.4.2 Fire protection measures When operating the battery, smoking and ...
using a densimeter or a thermometer, make sure the surface is clean and clear. 7) Recharge the discharged accumulator in time. Delayed recharging may damage the accumulator. Do not delay recharging more than 24 hours. Recharging of the accumulator may not work outdoors in cold weather. In this case, move it indoors to perform recharging. 8) If the accumulator will ...