Transition Networks 1005 Operation & User’s Manual
Read Online
Read the Transition Networks 1005 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
maintaining the TRANSITION Networks Model 1005 Ethernet™ Repeater Hub, contact TRANSITION Networks Technical Support at: (800) 260-1312 or contact your local distributor. Model 1005 24-Port Ethernet Hub 21 MODEL 1005 REPEATER HUB SPECIFICATIONS Standards IEEE 802.2, 802.3 Physical 17.0" x 7.5" x 1.7" (432 mm x 191 mm x 43 mm) Universal Power Supply Input Range: 85 to 265 VAC at 47 to 63 Hz. R ...
Ethernet™ Repeater Hub 20 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network. Compliance Information UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Regulations: This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These l ...
1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Model 1005 Repeater Hub . . . . . . . . . . . . . . . . . . . . . . .1 Model 1005 Repeater Hub Features . . . . . . . . . . . . . . . . . . . . .1 Networking the Model 1005 Repeater Hub . . . . . . . . . . . . . . . .2 Model 1005 Repeater Hub Connectors, Indicators, and Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2 SITE CONSIDERATIO ...
18 1 Ethernet™ Repeater Hub 1. INTRODUCTION This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks Model 1005 24-Port Ethernet™ Repeater Hub. A working knowledge of local area network (LAN) operations, including familiarity with communications protocols used on interconnected LANs, is assumed. The Model 1005 Repeater Hub The TRANSITION Networks Model 1005 24-Port ...
2 17 Ethernet™ Repeater Hub Networking the Model 1005 Repeater Hub The Model 1005 Repeater Hub can be installed in an Ethernet network by connecting 10BaseT cable between RJ-45 connectors on the front of the hubs. Additionally, the SIC slot on the back of the hub can be used to connect various media, selectable from among 10BaseT, 10Base2, 10Base5, and 10BaseFL. SIC Connection 10BaseT (100 meters) 10Base2 (185 meters) 10Base5 (50 ...
16 3 Ethernet™ Repeater Hub 1005 Repeater Connectors, Indicators and Switch Connectors Twenty-four (24) RJ-45 10BaseT connectors are located on the front of the Model 1005 Repeater Hub. One (1) power connector is located on the back of the Model 1005 Repeater Hub. NOTE: Slide-In cards (SICs), if installed at the back of the Model 1005, provide additional fiber optic, male and female AUI, BNC, or RJ-45 connectors. Indicators One set of ...
4 15 Ethernet™ Repeater Hub 4. OPERATION The Model 1005 Repeater Hub requires no intervention beyond occasionally monitoring the Power and Status LEDs. Monitoring Power LED The Power LED displays a steady green light when the Model 1005 Repeater Hub is connected to power. Monitoring Status LEDs The Link/Partition LED displays a blinking green light, indicating a partition condition, when the Model 1005 Repeater Hub port registers sixty ...
14 5 Ethernet™Repeater Hub Connecting Power to Model 1005 Repeater To power ON the Model 1005 Repeater: 1. At Model 1005 Repeater back, locate the Unit power receptacle and associated fuse. 2. Verify that fuse is installed at correct setting for power source voltage. NOTE: The installed fuse rating is indicated by the reading at lower right corner of fuse holder. If not installed at correct setting for power source voltage: • Careful ...
6 13 Ethernet™ Repeater Hub Male AUI Connector/PC Connection The male AUI card (E-AUI- DC-SIC) provides a male AUI connector for connection, through an AUI drop cable, to a 10Base5 port on a powered PC. Fiber Optic Connector/10BaseFL Connection The fiber optic card (E-FRL-SIC) provides one set of transmit (TX) and receive (RX) ST connectors to fiber optic cable. The redundant fiber optic card (E-FL/RED-SIC) provides a back-up fiber opt ...
12 7 Ethernet™ Repeater Hub 3. INSTALLATION To install the Model 1005 Repeater Hub: • Unpack the Model 1005 Repeater Hub. • Install Model 1005 Repeater Hub on flat surface. • Optionally install Slide In Card. • Connect Cable to SIC and RJ-45 connector. • Connect Model 1005 Repeater Hub to power. Direction is provided in the pages that follow. Unpacking the Model 1005 Repeater Hub The Model 1005 Repeater Hub packing contents s ...
To connect 10BaseT Cable to Model 1005 Repeater RJ-45 connectors: 1. Locate or build 10BaseT cables that are: • 802.3 compliant (See page 18) • correct (straight through or crossover) cable configuration for site installation (See page 6) • male RJ-45 plug 2. Connect male RJ-45 plug connector at one end of 10BaseT cable to Model 1005 Repeater Hub RJ-45 jack connector. NOTE: Use MDI Switch to change polarity ...
Ethernet™Repeater Hub 10 9 Connecting Cable to SIC and RJ-45 Connectors Connections between installed Model 1005 Repeater Hub SICs or between a Model 1005 Repeater Hub SIC and a hub or terminal device include: • Female AUI Connector/10Base5 • Male AUI Connector/PC • RJ Connector/10BaseT • BNC Connector/10Base2 • ST Connector/Fiber Optic BNC Connector/10Base2 Connection The thinnet coaxial card (E-CX-SIC) provides a BNC conn ...
Related Devices for Transition Networks 1005:
Transition Networks SM24DPB Quick Start Guide 33680 Rev. B https://www.transition.com Page 1 of 2 SM24DPB (20) 100/1000Base-X SFP Ports + (4) 10 Instruction and usage manual for the Transition Networks SM24DPB Switch. The guide explains setup and operation, safety features, service contacts, device reset instructions.
User’s Guide TN-GB-xM5x Gigabit Interface Converter (GBIC) Transceiver Modules The Transition Networks TN-GB-xM5x series Gigabit Interface Converter (GBIC) tr Product manual for the Transition Networks TN-GB-ESX5 Transceiver. It explains troubleshooting and product maintenance, installation steps, maintenance schedule.
User’s Guide SPSVT26xx-10x Stand Alone Device • High-Speed Serial • V.35/X.21/RS449/RS530/RS232 • Copper to Fiber Transition Networks SPSVT26xx-10x seri User setup guide for the Transition Networks SPSVT26xx-10x Media Converter. It explains installation, setup, and user instructions, detailing setup, software updates, performance details.
Transition Networks SPOEB10xx-105 User Guide 33618 Rev. C https://www.transition.com/ Page 1 of 16 SPOEB10xx-105 User Guide • Stand-Alone Media Converter • Instruction booklet for the Transition Networks SPOEB1039-105 Media Converter. The document elaborates on device functions and power requirements, internal layout, technical troubleshooting.
8 Port 100BASE-FX Plus One SFP Intelligent Fiber Switch MIL-SM808GPxx USER GUIDE Step-by-step user manual for the Transition Networks MIL-SM808GPxx Switch. This manual explains control functions, device features, setup instructions, operating instructions.
Transition Networks SI-IES-1200-LRT User Manual 33586 Rev. D https://www.transition.com Page 1 of 21 SI-IES-1200-LRT Hardened Gigabit PoE/PoE+ Injector User Man Product reference manual for the Transition Networks SI-IES-1200-LRT Laboratory Equipment. It offers guidance on configuration options, interface navigation, safety precautions, software installation.
10BASE-FL CABLE SPECIFICATIONS 10BASE-FL Cable Characteristics: MULTIMODE Fiber Optic Cable Recommended: 62.5 / 125 µm multimode fiber Optional: 100 / 140 µm Comprehensive user handbook for the Transition Networks T8-FL Switch. The manual contains instructions for connectivity setup, replacement parts, firmware installation.
Transition Networks SM24TBT2DPA Quick Start Guide 33736 Rev. D https://www.transition.com Page 1 of 2 SM24TBT2DPA Managed Switch, 24-port Gigab Comprehensive instruction manual for the Transition Networks SM24TBT2DPA Switch. The manual describes installation support, hardware components, detailing setup, operational procedures.
Switch: Frequently Requested PDF Instructions
Detailed user guide for the TRENDnet TEG-082WS Switch. The documentation guides users through setup and operating modes, firmware updates, shutdown procedures, supported accessories.
DAQ PCI-4451/4452 User Manual Dynamic Signal Acquisition Device for PCI April 1998 Edition Part Number 321891A-01 User guide for the National Instruments PCI-4451 Switch. It explains troubleshooting and troubleshooting guides, dimensions and layout, performance guidelines.
Multi Format Switcher System MVS-8000X System (With CCP-8000 Series) Multi Format Switcher System MVS-8000X System (With CCP-8000 Series Center Control Panel) U Usage and setup manual for the Sony MVS-8000X System Switch. The manual covers procedures for software installation, wiring setup, user instructions.
Operation Manual – File System Management H3C S3610&S5510 Series Ethernet Switches Table of Contents i Table of Contents Chapter 1 File System Management Conf Installation guide for the H3C S3610 Series Switch. It explains product safety, setup, operational procedures.