ActiveAid 285 Owner's Manual
Text of ActiveAid 285 Owner's Manual
DATE OF MANUFACTURE
SEE INSTRUCTIONS FOR USE
MANUFACTURER
SYMBOL LEGEND
!
CAUTION/ATTENTION
SERIAL NUMBER
SN
Please be environmentally responsible and
recycle this product through your recycling
facility at its end of life.
Afin de préserver l’environnement, veuillez
confier ce produit à votre centre de recyclage
à la fin de sa durée de vie.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
has been carefully designed and fabricated focusing on customer needs.
Shower/Commode Chair Description
ActiveAid shower and commode products are intended for individuals who are able to transfer independently or
with assistance from a caregiver. They are a useful tool for rehabilitation or home use. ActiveAid sho
•�The�Shower/Commode chair is designed to accommodate most individuals up to 350 lbs. (158kg).
•�The�expected�service�life�of�a�285�product�is�3�years�under�normal�use�conditions.
2. If the leg rests were ordered, insert the ends (with the
pin) into the receiver of the front support.
3.�Push�down�to�secure�the�leg�rest�into�the�front�
support.
Repeat�fo
4. If the large head support was ordered, remove acorn
nut and clamp from headrest assembly.
5. Unscrew�ratchet�handle�until�there�is�room�to�insert�the�
head support stem. Insert head support stem.
6.�Place�clamp�back�into�postion.�
4.
5.
6.
4
ActiveAid 285 8. If the small foam head support was ordered, place it
onto the back as shown.
9. If�the�Abductor/Deflector�was�ordered,�insert�into�the�
opening of seat as shown.
7.
8A.
9.
ActiveAid 285 Adjustable Sling Back
Loosen strap thru
brake, push down on the rear of the caster brake.
Removing Casters:�Loosen�then�remove�the�self-locking�nut�and�machine�screw�that�are�in�the�chair�frame�
where�the�casters�will�be�inserted.�Insert�caster�so�that�it�is�flush�w
ActiveAid 285 The lock release mechanism is not locking properly.
Loosen�the�top�tension�adjustment�nut,�lower�the�bottom�tension�adjustment�nut�one-half�(1/2)�of�a�turn,�and�
tighten�the�top�tension�adjustment�nut�to�properly�secure�both�tension�adjustment�nuts�in�place.��
If�the�lock�release�mechanism�continues�to�not�lock�properly,�repeat�the�adjustment�
9
Maintenance
•�It�is�necessary�to�inspect�your�Shower/Commode�chair�at�least�weekly�to�ensure�it�is�in�safe�operating�condition.
•�Check�all�fasteners�(snap�buttons,�screws,�nuts,�bolts,�clips,�pull�pins,�handles,�etc.)�to�ensure�they�are�present�
and secure.
•�Check�upholstery�for�tears�and�cracks.��
•�Check�belts�for�fraying,�cuts,�tears,�
This warranty is extended only to the original purchaser/customer (or supplier non consumer who does not buy
or resell). ActiveAid, LLC, warrants the 285 against defects in materials and workmanship as listed below.
•�
Stainless�Steel�Frames�–�3�year�warranty
•�
Brake�mechanisms,�locking�mechanisms,�wheels�and�casters�–�1�year�warranty
•�
Other�metal�and�structural�parts�not�of�stainless�steel