B&G electronics MPA-30A Installation And Operation Manual

EN 1.4 SIREN PROFESSIONAL SYSTEM FOR MOTORCYCLES INSTALLATION AND OPERATION MANUAL English MPA-30 OFFICIAL SIREN LIGHTS M.WAIL HORN ...

Switchbox (1) Attach it to the left handle bar using the mirror screws to fasten it. Make sure to place it within the driver’s reach. MPA-30 Loudspeaker + Electronic Module (1) Install it onto the slide bars using either clamps and/or screws (not included), or welding it. SIREN LIGHTS M.WAIL HORN Fro ...

1. Press and release SIREN. 2. While SIREN is active, press and release M.WAIL to switch among the available tones (PHASER, WAIL, Hi-Lo & YELP). OPERATION OF THE LIGHTS The activation and deactivation of the lights is controlled by the right switch. 1. To turn on the lights, pull down LIGHTS. 2. To turn of ...

Caja de Control (1) Sujete al manubrio usando los tornillos del espejo. Asegúrese de ubicarla al alcance de la mano del conductor. MPA-30 Bocina + Módulo Electrónico (1) Fijar a la defensa de la motocicleta, ya sea mediante abrazaderas y/o tornillos (no incluidos), o soldando directamente a los tubos ...

1. Suba SIREN. 2. Mientras está sonando SIREN, presione M.WAIL repetidamente para cambiar entre los tonos disponibles (PHASER, WAIL, Hi-Lo y YELP). FUNCIONAMIENTO DE LAS LUCES La activación y desactivación de la luces es controlada por el switch derecho. 1. Para encender las luces baje LIGHTS. 1. Para a ...