3M 10 Owner's Manual

Gun Owner’s Manual Alimentación por Presión de 3M™ Pistola aplicadora en spray HVLP (Alto Volumen Baja Presión) y LVLP (Bajo Volumen Baja Presión) Manual del Usuario Read Warnings and Instructions Lea las Instrucciones y Advertencias This Manual Covers Spray Gun Models 10, 11, 12S, 12SZ, 14, 15, 19 and 19C Este M ...

Topic Page Number Safety Statements .................................................................................................... 2 Contents-Unpacking ................................................................................................. 7 General Set Up and Spray Gun Use ............................................... ...

• Read, understand, follow and retain for future reference all safety statements in each applicable equipment owner’s manual and refer to the applicable Material Safety Data Sheet & material container label for each material to be sprayed before using your 3M equipment. • This equ ...

Company Name 3M Company Company Address Automotive Aftermarket Division 3M Center, Building 251 St Paul, MN USA 55144-1000 Declares that the products: Product name and or Model number 3M™ Pressure Feed Spray Guns Series 10, 11, 12S, 12SZ, 14, 15, 19, 19C 3M™ Gravity Feed Spray Guns Series 05-100, 05-300, 07, 07HS, 10G, ...

items. If you discover any damage and/or missing pieces, contact your distributor immediately. Your 3M™ Pressure Feed HVLP & LVLP Spray Gun Kit includes: • Spray Gun • Care Kit • Cup (optional) 3M™ Series 10 & 14 HVLP Spray Guns The 3M™ Series 10 & 14 ...

The fl uid fl ow can be adjusted by using the needle adjustment screw as noted in Fig. 1. As a starting point, gently turn the knob clockwise until you have very little needle travel (pull trigger to verify). Do not over-tighten. After the needle travel has stopped, further tightening will only serve to compress the spring an ...

gun and cup before servicing. 1. Turn off the air supply to the spray gun. 2. Disconnect air line from the spray gun. 3. Pull trigger to return mix to spray gun cap. General System Maintenance Do not immerse the spray gun in solvent. Spray Gun Care and Cleaning Do not wipe the spray gun with a cloth soaked in solv ...

tight. Pull trigger back and hold while you install the fl uid nozzle with the gun wrench. Tighten the nozzle securely to obtain a good seal. 12. Install the retaining ring and air cap. Spray Gun Care and Cleaning cont. 10. Scrub the retaining ring, air cap and fl uid nozzle with a soft-bristle brush. To cl ...

3M™ Series 10 & 14 Spray Gun Parts Identifi cation Item Description Replacement PN 1 Retaining Ring 91-043 2 Air Cap (Composite) 91-009-XXX 2* Air Cap (Aluminum) 91-071-XXX 3 Fluid Nozzle 91-143-XXXDT** 4 Closure Ring 5 O-Ring 6 Fluid Passage (Series 10) 91-064 6* Fluid Passage (Series 14) 91-2 ...

Item Description Replacement PN 1 Retaining Ring 91-043 2 Air Cap (Composite) 91-009-XXX 2* Air Cap (Aluminum) 91-071-XXX 3 Fluid Nozzle 91-143-XXDT** 4 Closure Ring 5 O-Ring 6 Fluid Passage (Series 11) 91-064 6* Fluid Passage (Series 15) 91-203 7 O-Ring 8 O-Ring UH-1405/10 (Pack of 10) 9 Needle G ...