ABB REF615R Manual 

Issued: 09/24/2016 Revision: B Product version: 4.1 © Copyright 2016 ABB. All rights reserved. ...

permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license. Trademarks ABB and Relion are registered trademarks of ABB Group. All other ...

product description and are not to be deemed as a statement of guaranteed properties. All persons responsible for applying the equipment addressed in this manual must satisfy themselves that each intended application is suitable and acceptable, including that any applicable safety or other operational requirements are complied with. In particular, any risks in ...

the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the ...

Table of contents Section 1 Introduction........................................................................... 7 This manual.............................................................................................. 7 Intended audience.................................................................................... 7 Document revision history.......................... ...

Physical and Logical Input / Output state Block ................................ 41 Function code 16 (Preset multiple register)............................................ 42 Control mask block (read and write).................................................. 42 Control command format change................................................. 42 Control command addresses change . ...

Table of tables Section 1 Introduction........................................................................... 7 Section 2 Modbus point list mapping mitigations ................................. 9 Section 3 0x registers......................................................................... 11 Table 1. Mitigations of Modbus registers mapping for the logical output points in ...

Table 20. Mitigation of Modbus mapping for fault records block ........... 46 Table 21. Mitigation of Modbus mapping for operation records ............ 48 Table 22. One example of Modbus event record value ......................... 48 Section 6 6x Registers........................................................................ 51 Section 7 Selected PCM ACT logic examples or ex ...

Table of figures Section 1 Introduction........................................................................... 7 Section 2 Modbus point list mapping mitigations ................................. 9 Section 3 0x registers......................................................................... 11 Section 4 1x Registers .......................................................... ...

Section 1 Introduction 1.1 This manual The mitigation manual compares REF615R's Modbus point list mapping with DPU2000R's. The manual should be used in conjunction with the corresponding communication point list mapping and protocol manual. 1.2 Intended audience This manual addresses, from substituting REF615R for DPU2000R perspective, the communication system eng ...

1.5 Symbols and conventions 1.5.1 Safety indication symbols Although warning hazards are related to personal injury, it should be understood that operation of damaged equipment could, under certain operational conditions, result in degraded process performance leading to personal injury or death. Therefore, comply fully with all warning and caution notices. The c ...

REF615R 9 DPU2000R Modbus Point List Mitigation Manual Section 2 Modbus point list mapping mitigations 2.1 Overview Thanks to today's modern computer's fast processing speed and the price drops of the computer physical memories, data acquisition bandwidth has greatly improved and the databases sizes has drastically expanded. As a result, data management has become a new focus as a large volum ...

10 REF615R DPU2000R Modbus Point List Mitigation Manual REF615R, please refer to the "Feeder Protection and Control REF615R Modbus Point List Manual" with Document ID: 1MRS240052-IB. ...

Section 3 0x registers 3.1 Function Code 1 (Read coil status) REF615R maps status information into two types of blocks as in DPU2000R. One is single-bit block, the other one is double-bit block. The single-bit block only provides status information, and the double-bit block provides both of the status and momentary change information. REF615R maps the output and ...

2 Breaker is Closing (Close) 2 LD0.MVGAPC8.Q3.stVal Configured by PCM600 ACT. 3 DPU is in ALARM (ALARM) 3 LD0.LLN0.Health.stVal Converted enum value to boolean to read ALARM as same in DPU2000R. 4 Under voltage Trip (27-1P) 4 LD0.PHPTUV1.Op.general 5 Negative Sequence Over-current Trip (46) 5 LD0.NSPTOC1.Op.general 6 Phase Instantaneous Over-current Trip (50 ...

30 Blown Fuse Alarm (BFUA) 30 LD0.SEQRFUF1.Str.general 31 Kilo amperes Symmetrical Inverted Alarm (KSI) 31 LD0.SSCBR1.APwrAlm.stVal 32 Recloser Counter Alarm 1 (79CA1) 32 LD0.SSCBR1.OpNumAlm.stVal 33 High Power Factor Alarm (HPFA) N/A in REF615R 34 Low Power Factor Alarm (LPFA) N/A in REF615R 35 Over-current Trip Counter Alarm (OCTC) N/A in REF615R 36 1st Ins ...

57 Neutral Instantaneous Over-current Trip (50N3 latch) See Section 7.1.6 for example or explanation 58 Phase Time Over-current Enabled (51P latch) See Section 7.1.6 for example or explanation 59 Neutral Time Over-current Enabled (51N latch) See Section 7.1.6 for example or explanation 60 Overvoltage Trip (59 latch) See Section 7.1.6 for example or explanation 6 ...