System Sensor IM-10 Installation And Maintenance Instructions
Text of System Sensor IM-10 Installation And Maintenance Instructions
Following are descriptions of the IM-10 mounting frameworks. There are two
mounting options for IM-10 modules:
• Up to six IM-10 modules can be installed on a CH-6 in a BB-6 cabinet
• One or two IM-10 modules can be installed in a BB-2 cabinet
CHASSIS
The CH-6 chassis is used to mount IM-10 modules in a BB-6 cabinet. It accom-
modates up to s
Step 3: Align two 4-40 screws with the two standoffs and tighten.
Step 4: Address and wire the modules according to the instructions in this
manual.
The steps in Figures 6a and 6b describe and illustrate module installation
when the rear chassis position and the position in front of it will be filled.
Front position installation is possible only if the rear
The module is shipped in Class B position, remove shunt for Class
A. When operating in Class A, alternate modules are paired together
(+0/+1, +2/+3, +4/+5, +6/+7, +8/+9), resulting in a total of five
modules. For example, if the base address switch is set to 28, then 30,
32, 34 and 36 will be automatically assigned to the modules while 29, 31,
33, 35 and 37
System Sensor warrants its enclosed product to be free from defects in materials and
workmanship under normal use and service for a period of three years from date of
manufacture. System Sensor makes no other express warranty for the enclosed product.
No agent, representative, dealer, or employee of the Company has the authority to in-
crease or alter the ob