STAYER WELDING GS-0 Operating Instructions Manual

Istruzioni d’uso Operating instructions Manual de instruções Área Empresarial Andalucía - Sector 1 C/ Sierra de Cazorla, 7 28320 - Pinto (Madrid) SPAIN Email: [email protected] Email: [email protected] GS-0 AS-R AS-1D AS-X AS-XP AS-XL FR Instructions d´emploi Instrukcja obsługi PL ...

2. Spares...................................................................... 17 3. Use limitations ........................................................ 17 4. Characteristics........................................................ 18 5. Specifications ......................................................... 18 6. User instructions .................. ...

parts: 1. Helmet sell STAYER EN 175 F (Fig nº 14). 2. Automatic�darkening�filter�4/9-13�STAYER 1/3/2/2/379�(Fig nº 3). 3. Front cover lens STAYER 1 F (Fig nº 6). 4. Back cover lens STAYER 1 S (Fig nº 2) Explanation of helmet sell STAYER EN 175 F STAYER=manufacturer code, EN 175= number of testing standard,�F=symbol�for�low�energy�impact�(45m/s) ...

Vision area .....................................................92 x 35 mm Degree of protection, clear state ....................................4 Degree of protection, dark state ................................9/13 Protection against inferred and ultraviolet ....................15 Interval between clear to dark ..................... 1/20.000�sec Internal between dar ...

6.1. Adjusting the mask to the user. In�the�models�AS-X�/�AS-XP�/�AS-1D.�Adjustments�may� vary�do�to�different�sizes�of�users�head.�To�correctly�adjust� the equipment to individual users, follow the proceeding instructions. 1. Adjust the height of the head: Adjust the upper band of�the�harness�(8),�adjust�the�length�of�the�band�so that it sits on the head in a way ...

Clean the equipment using a soft cloth, a medium soap and lukewarm water. Do not use solvents. Clean�the�automatic�filter�with�a�cloth�that�does�no�loose� fibers.�Do�not�project�sprays�in�equipment�nor�submerge. Store equipment in a place that has a medium temperature and is clean and dry without any dust. Since�the�inner�part�of�the�outer�filter�can� ...

not use the equipment if it does not comply with any of the following circumstances. Any component not valid should be replaced immediately. The harness to the head is clean, complete and adjusts perfectly to the head. The helmet is clean, complete and does not present any type of crack. The� filters� should� be� complete� with� no� embedded� projection chips ...

C/ Sierra de Cazorla, 7 28320 - Pinto (Madrid) SPAIN Email: [email protected] Email: [email protected] ...