Sun Microsystems Sun Blade 1000 Module Installation Manual

4150 Network Circle Santa Clara, CA 95054 U.S.A. 650-960-1300 Send comments about this document to: [email protected] Sun Blade 1000 and Sun Blade 2000 UltraSPARC™ III Cu Module Installation Guide Part No. 816-3221-10 January 2002, Revision A ...

This product or document is distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this product or document may be reproduced in any form by any means without prior written authorization o ...

v Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu CPU Module Installation Guide 1 UltraSPARC III Cu CPU Module Installation Kit Contents 1 Firmware and Software Requirements for Installing an UltraSPARC III Cu CPU Module 2 Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu CPU Module Installation Guide 4 Pre ...

...

Your Sun product is marked to indicate its compliance class: • Federal Communications Commission (FCC) — USA • Industry Canada Equipment Standard for Digital Equipment (ICES-003) - Canada • Voluntary Control Council for Interference (VCCI) — Japan • Bureau of Standards Metrology and Inspection (BSMI) — Taiwan ...

ICES-003 Class A Notice - Avis NMB-003, Classe A This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. ICES-003 Class B Notice - Avis NMB-003, Classe B This Class B digital apparatus co ...

The following statement is applicable to products shipped to Taiwan and marked as Class A on the product compliance label. ...

UltraSPARC III Cu CPU Module Installation Guide This document describes how to remove or install an UltraSPARC III Cu CPU module for the Sun BladeTM 1000 or Sun Blade 2000 workstation. The following topics are discussed: I “UltraSPARC III Cu CPU Module Installation Kit Contents” on page 1 I “Firmware and Software Req ...

Firmware and Software Requirements for Installing an UltraSPARC III Cu CPU Module Note – The 900 MHz version of the UltraSPARC III Cu CPU module is only available as an option for the Sun Blade 1000 workstation. If you are installing UltraSPARC III Cu CPU mod ...