Summit Treestands 82074 Manual
Read Online
Read the Summit Treestands 82074 Manual online using the built-in PDF viewer.
Key Pages of Document
and instructions (written and video)! Failure to follow these instructions may cause serious injury or death!! You MUST also view the enclosed DVD BEFORE using your new treestand!! WEIGHT LIMIT SINGLE USER 300 LBS. X 1 TOTAL* DO NOT EXCEED THIS LIMIT! (* Includes all gear) Stand minimum and maximum tree size: 8-20” diameter Outlook 82074, 1/2013 • WHEN ...
5/16X18 HARDWARE LISTED IN RED THROUGHOUT BOOKLET 1/4X20 HARDWARE LISTED IN BLUE THROUGHOUT BOOKLET PN DESCRIPTION QTY SU10687 3/4” BOLT, 5/16x18 3 SU10685 2” BOLT, 5/16x18 2 SU10610 2 3/4” BOLT, 5/16x18 4 SU10617 LOCK NUT, 5/16x18 9 SU10600 1 1/2” BOLT, 1/4x20 8 SU10601 1 3/4” BOLT, 1/4x20 13 SU10609 2 1/4” BOLT, 1/4x20 6 SU10612 LOCK NUT, 1/4x20 27 1/4” WIRE LOCK PIN 1 1 INDEX PG 2 GENERAL WARNINGS AND PRECAUTION ...
Tools Use • 7/16” Wrenches and / or Socket / Ratchet Main Ladder Bolts / Nuts -1/4x20 hardware • 1/2” Wrenches and / or Socket / Ratchet 5/16x18 hardware - Assembly can be made easier by the use of a powered ratchet or drill with socket adapter (take care not to overtighten when using power tools to assemble) - It is recommended that all bolts be sorted by thread count / length prior to assembly. 4 ASSEMBLY 3/4” BOLTS, LOCK ...
in figure 9. 2. Position the bars between the welded on U brackes and secure using one 1 3/4” bolt and lock nut per side as shown in figure 10. Leave these hand tight for now. PLATFORM (continued) 5. Position the Left Armrest Bar as shown in figure 5. 6. Slide the bar down on top of the Rear Seat Support and line up the holes. Secure using one 1 1/2” bolt and ...
3. Attach the Seat Support next. (see figure 11) Position the rear inside the welded brackets on both Rear Seat Support Bars. 4. Pivot the two Front Seat Support Bars up into the bracket on the Seat Support. 5. Secure all four locations using 1 3/4” bolts and lock nuts as shown in figure 12. Leave these hand tight for now. SEAT SUPPORT (PN 82074.7) 11 1 3/4” BOLTS, LOCK NUTS - HAND TIGHT 12 6. The Cross Tension Bars a ...
TOP LADDER SECTION (PN 82074.11) PG 6 www.summitstands.com LADDER SUPPORT 1. Position the Top Ladder Section as shown in figure 16. The ladder will slide into the welded brackets on the Platform. The Top Ladder Section has two couplers welded on and does not have a U Bracket. 2. Attach using two 2” bolts and lock nuts as shown in figure 17. Leave these hand tight for now. 2” BOLTS, LOCK NUTS - HAND TIGHT 17 LA ...
(PN 82074.13) WELDED U BRACKET MIDDLE LADDER SECTION (PN 82074.12) COMPLETED PLATFORM / SEAT ASSEMBLY 22 PG 7 1 3/4” BOLTS, LOCK NUTS - WRENCH TIGHTEN 21 BOTTOM LADDER SECTION (PN 82074.13) MIDDLE LADDER SECTION (PN 82074.12) 20 WELDED U BRACKET LADDER COLUMN 1. Position the Bottom Ladder Section and Middle Ladder Section as shown in figure 20. The welded U bracket faces the tree when fully assembled. The Bottom Ladder Section has ...
1. Position the Foam Seat inside the frame as shown in figure 28. 2. Wrap the Velcro straps around the Seat Support to attach. 3. Wrap the three included pads around the frame in the green areas as shown in figure 28. Pads can be repositioned to fit you needs. NOTICE The foam seat included with this treestand is removable for storage. DO NOT leave your stand outdoors when it is not being used. 28 FOAM SEAT (P ...
PLATFORM RATCHET STRAP 1. Attach the Ratchet with Loop End to the yoke tube at location A as shown in figure 29. Put the sewn loop around the tube (figure 30) and then push the ratchet through the loop (figure 31) to create a cinch knot as shown in figure 32. 2. Attach the Short Strap for the Ratchet to the opposite yoke tubing at location B shown in figure 29. Loop the free end of the strap around the tube and then through the sewn ...
an appropriate tree. The bottom ladder section should be placed approximately 3 feet from the base of the tree. 2. Using at least three adults, lean the ladder stand up into an upright position until the teeth make contact with the tree (see figure 35). 3. Pull the base of the ladder stand out until the platform is sitting level to flat ground as shown in figur ...
position. ALWAYS refer to your harness instructions included with this stand for proper use of your Summit Safety harness and Safety Strap 2. The length of the harness tether must be minimized at all times. It should be adjusted so that it is above the head with no slack (snug) in the sitting position and you should have the mini ...
The powdercoat finish applied at the factory is very durable and should only need touch ups in areas of heavy wear or accidental impact. The powder coat is applied only to the exterior surfaces of the treestand so it is possible for some surface rust to form inside the stand tubing. This is normal and should not affect the durability or perfo ...
PN 82074 Vous devez également visionné le DVD ci-joint AVANT d’utiliser votre nouveau mirador!! LIMITE DE POIDS LIMITE DE POIDS POUR OCCUPATION INDIVIDUELLE 136 KGS. X 1 TOTAL* NE DÉPASSER PAS CETTE LIMITE! (* Inclus tout l’équipement) Grosseur d’arbre minimum et maximum pour le mirador: 20-50 cm de diamètre • LORS D’UNE CHASSE À PARTIR D’UN MIRADOR, DES CHUTES POUVANT CAUSER DES BLESSURES OU LA MORT PEUVENT SU ...
PAGE 13 SECTION 1 - INDEX P 14 SECTION 2 - LISTES DES PIÈCES P 14 SECTION 3 - OUTILS REQUIS P 15 SECTION 4 - ASSEMBLAGE P 15 - 20 SECTION 5 - INSTALLATION ET UTILISATION P 21 - 23 SECTION 6 - ENTRETIEN ET SOINS P 24 SECTION 7 - SUSPENSION DU HARNAIS P 24 SECTION 8 - INFORMATION SUR LA GARANTIE LIMITÉE P 24 2 LISTE DES PIÈCES Appellez le 256-353-0634 ou visitez le site web à ...
Outils Utilisation • Clés 7/16 po. et / ou Douille / Rochet Boulons pour échelle principale / écrou -1/4x20 quincaillerie • Clés 1/2 po. et / ou Douille / Rochet - L’assemblage peut être facilité avec l’utilisation d’un rochet électrique ou d’une perceuse avec douille (assurez-vous de ne pas serrer trop fort lors de l’assemblage avec des outils électriques). - Il est recommandé que les boulons soient triés par nombre ...
1. Placez les deux barres de support du siège avant tel qu’illustré à la figure 9. 2. Placez les barres entre les supports soudés en ‘U’ et attachez-les en utilisant un boulon de 1 ¾ po. et un écrou de blocage de chaque côté tel qu’illustré à la figure 10. Serrez ces boulons à la main pour l’instant. PLATEFORME (suite) 5. Placez la barre d’accoudoir gauche tel qu’illustré à la figure 5. 6. Glissez la b ...
3. Attachez le support du siège. (voir figure 11). Placez l’arrière dans les supports soudés des deux barres de support arrière du siège. 4. Faites pivoter les deux barres de support avant du siège dans les supports du siège. 5. Attachez les quatre positions en utilisant des boulons de 1 ¾ po. et des écrous de blocage tel qu’illustré à la figure 12. Serrez ces boulons à la main pour l’instant. BASE DU SI ...
SIÈGE SECTION SUPÉRIEUR DE L’ÉCHELLE (PN 82074.11) SUPPORT POUR ÉCHELLE 1. Placez la section supérieure de l’échelle tel qu’illustré à la figure 16. L’échelle se glisse dans les supports soudés sur la plateforme. La section supérieure de l’échelle a deux coupleurs soudés et aucun support en ‘U’. 2. Attachez en utilisant deux boulons de 2 po. et des écrous de blocage tel qu’il ...
L’ÉCHELLE (PN 82074.13) SUPPORT EN ‘’U’’ SOUDÉ FAISANT FACE À L’ARBRE SECTION DU MILIEU DE L’ÉCHELLE (PN 82074.12) PLATEFORME COMPLÉTÉE / ASSEMBLAGE DU SIÈGE 22 1 3/4” BOULONS, ÉCROU DE BLOCAGES - SERRER À CLÉ 21 SECTION IN- FÉRIEURE DE L’ÉCHELLE (PN 82074.13) SECTION DU MILIEU DE L’ÉCHELLE (PN 82074.12) 20 SUPPORT EN ‘’U’’ SOUDÉ FAISANT FACE À L’ARBRE 1 3/4” BOULONS, ÉCROU DE BLO ...
1. Placez le siège en mousse à l’intérieur du châssis tel qu’illustré à la figure 28. 2. Entourez les bandes Velcro autour du support du siège pour les attacher. 3. Entourez les trois coussinets inclus autour du châssis dans les positions vertes tel qu’illustré à la figure 28. Les coussinets peuvent être repositionnés selon vos besoins. 28 SIÈGE EN MOUSSE (PN 82074.17) 24 SUPPORT EN ‘’U’’ S ...
Related Devices for Summit Treestands 82074:
FORM # 82092 - 3/16 Mammoth Fixed Position Treestand PN SU82092 WARNING ! FAILURE TO READ AND FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS CONSTITUTES Technical instruction manual for the Summit Treestands Mammoth SU82092 Kitchen Appliances. The document includes user instructions, setup guidelines, technical assistance, supported accessories.
Climbing Treestand Viper Classic (81052 / 81529) INSTRUCTIONS WARNING ! You must fully read, understand and follow these warnings and instructions (written and Complete user documentation for the Summit Treestands VIPER CLASSIC INFINITY Kitchen Appliances. This reference includes user preferences, usage tips, safety, energy usage.
FORM# 82098 - 3/16 Trophy Chair WARNING ! FAILURE TO READ AND FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS CONSTITUTES A MISUSE OF THIS PRODUCT AND COU Operation instructions for the Summit Treestands SU82098 Indoor Furnishing. This manual provides information on maintenance schedule, wiring diagrams, operating guidelines.
FORM# 82051 - 2/2016 Summit SwifTree PN SU82051 WARNING ! FAILURE TO READ AND FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS CONSTITUTES A MISUSE OF THI Official user manual for the Summit Treestands SwifTree SU82051 Ladders. It outlines installation and assembly reference, regulatory notices, safety information, safety guidelines.
The Vine Double Hunter Ladder Treestand SU82095 WARNING ! FAILURE TO READ AND FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS CONSTITUTES A MISUSE OF THIS Device guide for the Summit Treestands The Vine Double Hunter Kitchen Appliances. The guide covers usage and menu navigation, product maintenance, safety protocols, usage recommendations.
The Hex Ladder Treestand SU82097 WARNING ! FAILURE TO READ AND FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS CONSTITUTES A MISUSE OF THIS PRODUCT AND CO Comprehensive instruction manual for the Summit Treestands Hex SU82097 Kitchen Appliances. This guide provides information on installation, maintenance, performance optimization, connectivity setup.
WARNING ! You must fully read, understand and follow these warnings and instructions (written and video)! Failure to follow these instructions may cause serious Operating instructions for the Summit Treestands Perch 82069 Kitchen Appliances. This documentation guides on warranty information, connectivity setup, component overview, service instructions.
FORM# 82094 - 2/2016 Vine Climbing Aid PN SU82094 WARNING ! FAILURE TO READ AND FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS CONSTITUTES A MISUSE OF T User reference manual for the Summit Treestands Vine SU82094 Kitchen Appliances. It contains information on system checks, dimensions and layout, support details.
Kitchen Appliances: Frequently Requested PDF Instructions
SIMPLY CLEVER ŠKODA Octavia Owner's Manual Maintenance instructions for the Skoda OCTAVIA Automobile. This guide provides information on assembly reference, testing procedures, reset instructions.
8.2.1 Edition 08.10 DK S N P GR www.docuthek.com D GB F NL I E TR CZ PL RUS H © 2008 – 2009 Elster GmbH Please read and keep in a safe place Please read Quick reference guide for the Kromschroder UVS 10 Kitchen Appliances. This reference manual explains device operation tips, installation procedures, operational procedures.
Folheto Informativo n.º 10/2021 (290 308) REF. 40961 TOMADA SCHUKO MÓVEL 10A METERING D40 - PT P. 2 BASE SCHUKO MÓVIL 10A METERING D40 - ES P. 9 MOBILE SCHUK Detailed product documentation for the Efapel SCHUKO 40961 Kitchen Appliances. This manual covers operational safety, setup, software configuration, technical specifications.
Technical Data Technical Data •� AC/DC current: Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit User setup guide for the Fluke 345 Measuring Instruments. The documentation includes details on device operation tips, performance details, usage examples.