Xerox Phaser 380 Repacking Manual
Text of the manual
Copyright © 1997 by Tektronix, Inc. All rights reserved.
063-2659-00
Repacking the Color Printer
and its Accessories
Overview
It is very important that you follow the correct repacking procedure before shipping your color printer.
Failure to properly repack the printer can cause damage to the printerÕs internal components. You are
responsible for any shi
Repacking the Color Printer and its Accessories
Removing the maintenance tray
Caution
To avoid damaging the printer, always remove the maintenance tray before moving
or shipping the printer. Never ship a partially used maintenance tray.
1.
Open the printerÕs front cover.
2.
Grasp the maintenance tray by the front edge and lift up while sliding it out of
Repacking the Color Printer and its Accessories
Locking the transit restraint
Caution
To avoid damaging the printer, always lock the transit restraint before moving or
shipping the printer.
1.
Locate the transit restraint on the right side of the printer.
2.
Insert a wide coin into the transit restraint slot.
3.
While pressing inward with strong pressure,
Repacking the Color Printer and its Accessories
Repacking the printer and its accessories
Warning
The printer weighs about 100 kg. (220 lbs.). Do not attempt to lift it without the
assistance of three others. Always use the four pull-out handles located under each
corner of the printer when moving it.
1.
Repack the printer’s accessories. Place the pow
Repacking the Color Printer and its Accessories
a
b
c
f
g
220 lbs.
100 kg
d
e
h
32659-02
BOTTOM
BOTTOM
BOTTOM
TOP
TOP