Struers Minitom Instruction Manual

Revision A Date of Release 2018.12.20 ...

Page Intended use .............................................................. 3 Safety Precaution Sheet ............................................ 5 User’s Guide .............................................................. 9 Reference Guide ...................................................... 24 Conte ...

primary non-metals, for further materialographic inspection and only to be operated by skilled/trained personnel. The machine is only designed to be used with Struers consumables specially designed for this purpose and this type of machine. Cutting of ...

questions or when ordering spare parts. You will find the Serial No. and Voltage on the type plate of the machine itself. We may also need the Date and Article No of the manual. This information is found on the front cover. The following restrictions should be obs ...

Read carefully before use 1. Ignoring this information and mishandling of the equipment can lead to severe bodily injuries and material damage. 2. The machine must be installed in compliance with local safety regulations. All functions on the machine and any connected equipment must be in working o ...

and/or hair cannot be caught by the rotating parts. Appropriate safety clothing must be used. 17. If you observe malfunctions or hear unusual noises - stop the machine and call technical service. 18. The machine must be disconnected from the mains prior t ...

Struers uses the below icons and typographical conventions. For a list of the Safety Messages used in this manual, see the section on Cautionary Statements. Always consult the Instruction Manual for information on the potential hazards marked by the icons fixed to the machine. ELECTRICAL HAZARD indicates an e ...

special care. HINT indicates additional information and tips. The 'colour inside' logo on the cover page of this Instruction Manual indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users shou ...

Page 1. Getting Started Device Description .......................................................................... 10 Unpacking Minitom .......................................................................... 10 Checking the Contents of Packing ................................................ ...

Minitom is an automatic cut-off machine, with integrated cooling tank, for cutting the majority of solid and stable (non-explosive) materials, primary non-metals. The cut-off wheel speed and cutting pressure can be adjusted during the cutting process. The cutting process starts by the operator selecting and mo ...