Stoneridge SE5000-8 Workshop Manual

approval for use in the European union according with Commission Regulation (EU) 2016/799 of 18 March 2016 and other related legislatives. The Approval Certificate number will be indicated on all Stoneridge tachograph. The tachograph fulfils the requirements of UNECE regulation number 10, revision 05, in respect of electromagnetic compatibility. Workshop Card If a workshop card is lost, stolen or faulty, contact the responsible authority. Note! The workshop card is not allowed to be used by any unauthorised personnel. Never store the workshop card together with the associated PIN code ...

Table of Content Important 3 Workshop Card 3 Tachograph Version 3 Internet Information 3 Copyright 3 Changes 3 Table of Content 4 Introduction 6 Repairs and Modifications 6 Operation Safety 6 Workshop Functions and Equipment Requirements 6 Overview 7 Motion Sensor (1) 7 Smart Tachograph (2) 7 Display in Instrument Cluster (3) 7 Workshop or Driver Card (4) 7 DSRC (5) 7 Insert a Workshop Card 7 Initial Procedure 7 Withdraw a Workshop Card 8 User Interface 9 Settings 9 Languages 9 Available Languages 9 Change Parameters 10 Symbols 11 Symbol Combinations 11 Printouts 12 Printout Data 12 Printout Examples 12 Daily Printout (card) 13 Daily P ...

VU Security breach attempts 48 Motion sensor related events 49 Recording equipment faults 49 Card faults 50 Manufacturer specific events and faults (pop-ups) 50 Frequently asked Questions, FAQ 52 - 5 - ...

performing installation, maintenance, periodic inspection and repair of the SE5000-8. It is mainly concerning the calibration mode of operation. However, knowledge of the operational mode of the unit is also required in case of driving a tachograph fitted vehicle for calibration or testing purposes. For driver related information, please see the latest version of the Driver & Company Manual. Repairs and Modifications Note! A tachograph case must never be opened. No tampering with or modifications to the tachograph system are permitted. Unauthorized personnel that modify this equipm ...

1. Encrypted motion sensor 2. Smart tachograph, with integrated display and printer 3. Display in vehicle’s instrument cluster 4. Card 5. DSRC (Dedicated short-range communications) Motion Sensor (1) Used to provide the tachograph with speed signal pulses from the vehicle gearbox. To ensure the integrity of the speed sensor signal, the speed signal is transferred between the sensor and the tachograph in an encrypted form. Encrypting the speed signal ensures that any tampering with the signal will be detected and recorded. Smart Tachograph (2) The tachograph records and stores various data: l Workshop or ...

using the buttons. 4. Use the arrow button to select the correct digit. Confirm with OK. Repeat selecting and confirming as needed. The PIN code can contain from 4 to 8 characters. Use the Back button to go back and change a digit. The card will be ejected if no PIN code is entered within 2 minutes. 5. Select the enter symbol to identify the end of the entered PIN code and then confirm the code by long-pressing the OK button. Note! If the wrong PIN is entered, a message will be displayed to indicate how many attempts there are left. Withdrawal of card after entering a wrong PIN code will not res ...

comprises two card tray mechanisms, a printer, an LCD display, a calibration/download interface (6-pin connector located behind paper cassette) and user controls, located in an ISO standard radio enclosure. This type of enclosure enables mounting in a variety of locations, ensuring that insertion and removal of the driver cards and operation of the controls can be easily achieved by an operator. The tachograph complies with EU Regulations and displays and records speed and distance in metric units (kilometres per hour and kilometres respectively). The tachograph also incorporates ...

Warning! Changes in the parameter settings affect the tachograph and the vehicle system. Make sure you know the configuration of the vehicle before any changes are made. To change a parameter: Press the OK button and select: SETTINGS Press the OK and select: Parameters Scroll through the parameters and use the arrow button to change the parameter settings. Confirm the change with OK. The display will show: Changes saved Press the Back button twice to return to the standard display. The following parameters can be changed in calibration an ...

on the display and on the printouts. Symbol Description Function not available Driver or slot Co-driver or slot Card Eject Work Driving/driver (mode of Operation) Rest/break Available Ferry / train crossing OUT Out of scope, -i.e. no activities time durations are calculated Local time/location Start of daily work period End of daily work period Break From or to Printer, printout Paper Display Processing, please wait Time, clock UTC UTC time 24h Daily | Weekly || Two weeks Total/summary Speed Over speeding Faults ! Events ? Pre-warning/question/unknown activity Workshop Company C ...

tachograph and on the driver cards by printing it on paper or by showing it on the display. There are a number of different presentations available, which you can read more about in Printout Examples below Printout Data 1. Press OK to show the menu and select: PRINT 2. Press OK and select the type of printout to make. Then press OK. Some types of printouts require specification of the driver card and a date. If so the following is displayed: Select card 1 or 2 3. Select 1 to make a printout for the current driver's card or 2 to make a printout for a co-driver's card. Some printouts require ...

This printout lists all activities stored on the driver card (or co- driver card) for the selected date (legal requirement). UTC time is used. The display shows the following (on the second line): 24h card 1. Printout date and time 2. Type of printout (24h, card) 3. Card holder’s surname 4. Card holder’s first name 5. Type of card, Country, and Card Identification. 6. Card expiration date and generation 7. Vehicle identification, VIN 8. Registering member state and Vehicle Registration Number, VRN 9. Tachograph manufacturer 10. Tachograph part number 11. Tachograph generation number 12. Responsible workshop for last calibratio ...

M=Manual entries of driver activities. This printout lists all activities stored in the tachograph (VU) for the selected date (legal requirement). UTC time is used. The printout is dependent of the following: l If no card is inserted, select either the current day or any of the eight previous calendar days. l When a card is inserted, select any day stored in the tachograph, out of a maximum of typically the recent 28 days. If no data is available for the selected date, the printout will not be initiated. The display shows the following (on the second line): 24h vehicle 1. Printout date and time 2. Type of printout (24h, VU) 3. ...

34. Record identifier (VU daily summary per driver) 35. Driver surname 36. Driver’s first name(s) 37. Driver’s card identification 38. Time and location at the start of daily period 39. Longitude at the start of daily period 40. Latitude at the start of daily period 41. Time of latest position from GNSS 42. Odometer on start of daily period 43. Time and location at the end of daily period 44. Longitude at the end of daily period 45. Latitude at the end of daily period 46. Time of latest position from GNSS 47. Odometer on end of daily period 48. Time after 3 hours of accumulated driving 49. Longitude after 3 hours of accumu ...

(card) This printout lists all warnings and faults stored on the card (legal requirement). UTC time is used. The display shows the following (on the second line): event card 1. Date and time 2. Type of printout (event and faults, card) 3. Card file system (generation 1 or 2) 4. Card holder’s surname 5. Card holder’s first name 6. Card and country identification number 7. Card expiration date and generation 8. Vehicle identification number VIN 9. Registering member state and Vehicle Registration Number, VRN 10. List of all events stored on the card 11. List of all faults stored on the card 12. Control place 13. Controller's signatu ...

1. Type of event or fault. 2. Event or fault code. 3. Event or fault record purpose (All purposes are not saved for each event): 00 - one of the 10 most recent (or last) events or faults. 01 - the longest event for one of the last 10 days of occurrence. 02 - one of the 5 longest events over the last 365 days. 03 - the last event for one of the last 10 days of occurrence. 04 - the most serious event for one of the last 10 days of occurrence. 05 - one of the 5 most serious events over the last 365 days. 06 - the first event or fault having occurred after the last calibration. 07 - an active/on-going event or fault. 4. Da ...

settings, tyre size, calibration data and time of adjustments. The display shows the following (on the second line): technical data 1. Date and time 2. Type of printout (technical data) 3. Cardholder ID 4. Vehicle Identification Number (VIN) 5. Registering member state and Vehicle Registration Number, VRN 6. Tachograph manufacturer 7. Tachograph part number 8. Tachograph approval number 9. Tachograph serial number, type of equipment and code of manufacturer 10. Year of manufacture and software version and installation date 11. Motion sensor serial number 12. Motion sensor approval number 13. Date and time ...

events together with duration and the name of the driver. The display shows the following (on the second line): overspeeding 1. Date and time. 2. Type of printout. (overspeeding). Speed limiting device setting. 3. Card holder’s surname. 4. Card holder’s first name. 5. Card and country identification number. 6. Expiry date of the driver card. 7. Vehicle identification. VIN, registering member state and VRN. 8. Date and time of the last overspeeding control. 9. Date and time of first overspeeding and number of over speeding events since the last over speeding control. First overspeeding after the last cal ...

cards used in the Tachograph. The display shows the following (on the second line): historic cards 1. Date and time 2. Type of printout: History of inserted cards 3. Card holder’s surname 4. Card holder’s first name 5. Card and country identification number 6. Expiration date and generation of the driver card 7. Cards insertion section 8. Type of card, generation, version, manufacturer 9. Card identification 10. Card serial number 11. Date and time of last card insertion 12. Faults from card section - 20 - ...