StarTech.com IDECASE35F Instruction Manual

Text of StarTech.com IDECASE35F Instruction Manual

3.5” External IDE Drive Case

IDECASE35F IDECASE35U2 Instruction Guide The Professionals’ Source For Hard-to-Find Computer Parts EXTERNAL DRIVE CASE * Actual product may vary from photo * IDECASE35U2 shown

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting Your External Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Driver Installation . . . . . . . . . . . . . . . . . . .

Thank you for purchasing a StarTech.com 3.5” external storage device. Designed for 3.5”

hard drives, this device allows you to quickly connect and disconnect your hard drives, making data storage, backup, and sharing easier than ever before. The IDECASE35U2 features USB 2.0 capabilities, meaning you’ll experience super-fast data transfer speeds of up to 480 Mbits/sec. The IDECASE35F uses FireWire technology to reach data transfer speed

• 1 x external storage device

• 1 x cable (USB 2.0 or FireWire) • 1 x power adapter • 1 x assorted screws/replacement parts NOTE: Notebook users may need to purchase a separate 4-to-6 pin FireWire cable in order to connect the IDECASE35F. Check your computer’s user manual for more details. StarTech.com carries a wide range of FireWire cables to suit your needs. Visit www.startech.com and click on the “Cables & Wiring” tab at the to

Connecting Your External Case

1. Make sure that your system is turned off. 2. Plug one end of the USB/FireWire cable into an open port on your computer. Plug the other end into the port on the case. 3. Plug the power adapter into the case and plug the other end into an available power source. 4. Power the device by flicking the small button on the back to the ON position. 5. Turn your computer on. Driver Installation IDECASE35U2 The most up-to-date drive

Using Your External Case

IDECASE35U2 When the new drive is connected, it will appear as an icon on the bottom right of your screen. You can double-click the icon for information on the drive. The device will also appear under your “My Computer” window. You can now use the drive as your would any other drive on your system. When you want to remove your external case, first make sure that there is no activity on the hard drive contained in the case. Do

StarTech.com Enclosure Owners Instructions: